Driver designer help.

[Machinist Joe]

So guys, I've been planning to design my own driver for a while now and have been trying, but its really a pain. :banghead:

Im not good with eagle, and don't really understand how to read datasheets.

Im looking for somebody to really help me design this driver, and in return, I'll send you a few for your time, and will give you tons of credit too.

All you need is basic electronics knowledge and eagle skills.

One thing I ask is to keep all of my thoughts I share with you confidential. At least until it is released.

Thanks all. :beer:

 

[bobhaha]

What kind of driver are you wanting to develop?? You have to be aware building a working schematic is quite time consuming and takes a lot of effort to just get the schematics working. I can give you a hand... But it depends on the type of driver you want to make.

-Adrian

 

[AnthoT]

What type of driver, I may be able to help :beer:

 

[Machinist Joe]

I even have a half assed schematic drawn up in paint. I can't find the part in eagle

Anybody?

 

[benmwv]

Hey joe, most parts arent in eagle.

You have to just make your own. Its not very hard once you figure it out, just make the schematic symbol and copy the package layout from another library then link them together.

 

[Machinist Joe]

I'll look into that later. I think Foulmist is helping me design the driver for now.

Thanks for the help Ben

Hey joe, most parts arent in eagle.

You have to just make your own. Its not very hard once you figure it out, just make the schematic symbol and copy the package layout from another library then link them together.

 

[laserluke]

Here you can find a project with eagle and simulation files. With the values shown it performs very well

 

[flare09]

Woah Woah, I need some help too! Haha I can offer the same, and some currency....hate to thread steal.