I recently built a blue laser using one of Mohagsm's JAD kits with a 1.8A Driver and a 445nm 140 diode. I Don´t have an LPM but the laser can easily light a cigarrete, my doubt is that the beam seems to be... not as visible as I expected but it still has the burning power is this usual or can there be any faults with the laser?
Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers
Buy Site Supporter Role (remove some ads) | LPF Donations
Links below open in new window
FrozenGate by Avery
DIY 445nm laser
- Thread starter OoAntonoO
- Start date
- Joined
- Dec 23, 2008
- Messages
- 3,948
- Points
- 63
Congrats on your build. In the future give as much info as possible when you have a problem. What type of lighting was it in? Any blue laser that is strong enough to light a cig will be very visible outside from dusk till dawn.
Michael
Michael
- Joined
- Feb 18, 2013
- Messages
- 744
- Points
- 28
Yes, go outside at night and it should be very visible. Just be carefull pointing it in the sky.
