DIY 4.2 cm 5MW red laser

[ofekgg]

I got a DX 5Mw red laser module with adjustable focus, LR41 batteries and a little switch, and make it to a mini laser until i`ll find 16x dvd diode and make mini "kipkay laser" :]

enjoy from the pics!

 

[WonHungLow]

bad idea...
the "kipkay laser" or Maglight flashlight hack has no current regulation. it may work, but it will not work for long. i see in the pic that there is a driver. what is it (e.g. LM317 based, flexdrive, microdrive, etc..) you can build an LM317 current regulated circuit for about $3 or less from RadioShack and find schematics on this forum.

http://www.laserpointerforums.com/forums/YaBB.pl?num=1185701612

http://www.laserpointerforums.com/forums/YaBB.pl?num=1185701612

here is a list of tutorials on the forum...
http://laserpointerforums.com/laser_pointer_forums_3/forum/showthread.php?t=36820

and welcome to the forum

 

[Switch]

LR41 batteries won't provide enough current to burn your diode, so I think it's safe even without a driver in this setup.But then again, it won't have much power or battery life either.Also make sure they sum up to the right voltage: 3 x 1.5V might be too much for a 16x DVD diode.

 

[Kenom]

bah. My teenie burners are made to work off 3 button cell batteries. Works great. And this is with no driver.