CNI Module Slipped Out of Casing

[x101xtreme]

I've been having a problem with my CNI green laser recently in that the laser module came loose from the housing. The laser itself still works, but I was wondering if any of you guys know what I need to use to glue it back.  Right now, I'm using tape to hold the module in place, but I think the module is making bad contact with the housing causing it to flicker  out sometimes. Is there some sort of conductive adhesive that I can use to glue it back in place?

Here are some photos of what it looks like now.

 

[daguin]

Wrap a single thickness of foil around the module and push it back together.  The foil will "fill" the looseness and make the contacts better at the same time.

If a complete wrap is too much, try half a wrap

Peace,
dave

 

[Spyderz20x6]

It's always better to use some conductive adhesive foil tape

http://cgi.ebay.com/1-1-2-3M-COPPER...yZ109475QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

You're welcome