Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

**CLOSED** Daguin's Epic Sale **CLOSED**






Re: Daguin's Epic Sale

Hey Dave, whats the burning range on that Scorpius D?

Pete
 
Last edited:
Re: Daguin's Epic Sale

These things are not dissolving...

What kind of evil has been used to curse these pellets?!

I'm smell like finger nail polish remover, and I've still got 3,000 of these things all over the place. Curses.
 
Re: Daguin's Epic Sale

Daguin, I received the PHR diodes in the mail this morning. Thanks for the fast service and great prices.

Just got one installed in a aixiz module and soldered up to a rkcstr driver set to 98mA and it burns better than the other phr i have in my host with driver set to 118mA.
 
Last edited:
Re: Daguin's Epic Sale

Yeah some of the PHRs are better than others. I have a freak too, but am saving it for no good reason.
 
Re: Daguin's Epic Sale

Yea, I bought 2 of the phr diodes off of daguin and i just tried the second one and it is probably the weakest one that i have had. Even running them at the same current, the second one will barely light a match. Maybe i just dont have it fully seated in the aixiz module. I do notice that it does not want to focus to as sharp of a point as the first one. I will work on it later.
 
Re: Daguin's Epic Sale

buster7467 said:
Yea, I bought 2 of the phr diodes off of daguin and i just tried the second one and it is probably the weakest one that i have had. Even running them at the same current, the second one will barely light a match. Maybe i just dont have it fully seated in the aixiz module. I do notice that it does not want to focus to as sharp of a point as the first one. I will work on it later.
Click to expand...

Try swapping the lenses. One of them may have a problem. Some other possibilities; something on the diode window, a cracked diode window, the diode not set "square" in the module, diode not set deeply enough in the module.

Diodes will vary for IP/OP, but focus problems are usually from an exterior variable.

Peace,
dave
 
Re: Daguin's Epic Sale

About the Co2 laser....

It's more or less ~32 Volts to the RF pre-amp,

and then air cooling to the head?

Mike mentioned something about a PWM driver.... not too sure what that is.

Some kind of amp? I might ask Mike if you're not too sure yourself. The Co2 tube is still a good deal. I'm still thinking about it.

Thanks Dave,

-Tyler
 
Re: Daguin's Epic Sale

Meatball said:
About the Co2 laser....
It's more or less ~32 Volts to the RF pre-amp,
and then air cooling to the head?
Mike mentioned something about a PWM driver.... not too sure what that is.
Some kind of amp? I might ask Mike if you're not too sure yourself. The Co2 tube is still a good deal. I'm still thinking about it.
Thanks Dave,
-Tyler
Click to expand...

PWM stands for Pulse Width Modulation. It is the controller that allows you to turn the power up and down.

Mike may be able to help you with what he got (or made)

Peace,
dave
 
Re: Daguin's Epic Sale

Alright, that helps a bit. I'll hit up Mike, and the Faq for some more answers. I'll have to decide quickly..

Thanks Dave,

-Tyler
 
Re: Daguin's Epic Sale

daguin said:
Try swapping the lenses. One of them may have a problem. Some other possibilities; something on the diode window, a cracked diode window, the diode not set "square" in the module, diode not set deeply enough in the module.

Diodes will vary for IP/OP, but focus problems are usually from an exterior variable.

Peace,
dave
Click to expand...

I think the problem is that i did not get the diode pressed all the way in the aixiz module. I will take the diode off the driver and see if i can get it pressed in alittle more. I have 5 different aixiz lenses and they all seem the same. Plus, i found a problem with one of my rkcstr drivers. I can set it at 100mA and i can watch my DMM and watch it jump from around 90mA up to 120mA. It just keeps going up and down on its own. I think the pot is no good. The only reason i noticed it was because when i would turn the laser on, i could see the diode pulsing.
 
Re: Daguin's Epic Sale

buster7467 said:
I think the problem is that i did not get the diode pressed all the way in the aixiz module. I will take the diode off the driver and see if i can get it pressed in alittle more. I have 5 different aixiz lenses and they all seem the same. Plus, i found a problem with one of my rkcstr drivers. I can set it at 100mA and i can watch my DMM and watch it jump from around 90mA up to 120mA. It just keeps going up and down on its own. I think the pot is no good. The only reason i noticed it was because when i would turn the laser on, i could see the diode pulsing.
Click to expand...

DISCO LASER!!! :crackup:

Peace,
dave
 
You must log in or register to reply here.





Back
Top