check this and let me know for yourself.

[tony70516]

This annoys me. read the text in the photos.

 

[lasersbee]

It doesn't annoy me... :-/

Is there a question here or are you just stating facts...

Jerry

 

[laserfreak3d]

its kinda normal for the cheap green pointers to have the beam not  in the center of the aparture.
And theres not a lot u can do about it except realligne the first lens after the crystals
but in most cases the lens is glued to the assy

 

[tony70516]

Well I have the wicked lens cap set coming in the mail for me and that should fix it for sure

 

[Th0ughts]

Well I have the wicked lens cap set coming in the mail for me and that should fix it for sure

There's your problem! It's from WL!

 

[rog8811]

There's your problem! It's from WL

You will rarely find a greenie that has a perfectly straight beam.

You may find that some of that scatter is due to the beam reflecting off the edge of the aperture (going by your drawing) If it is I would be looking to the manufacturer for a replacement.

Regards rog8811

 

[tony70516]

your wrong bud. its a dx true 100. im using the wicked cap set for burning.