Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

New York Skating Lessons | Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

Argon Cooling fan

Link

0
Joined
Sep 20, 2009
Messages
52
Points
8
Hello.. again!

My argon laser needs a shiney new fan for the head, its a 120mm fan currently running on a seperate plug to my PSU, I've seen a 335cfm fan, but would that cause too much air pressure inside the head?
 





I don't think there is such a think as too much cooling air cycling through there. I'd say go for it.. (post a link, too.. i could use a more powerful one for mine..)
 
Just found out its too big for my laser head, it was down in inches and I don't do inches :P on that note if anyone knows where i can get a 120mm 110v or 230v axial fan with a CFM of 200 or higher let us know! :D
 
I found a trashed airhocky table at the roadside- the fan on the bottom fit perfect in my square style argon. Another hakzaw1 'find of the day' BTW any more than very brief 'testing' of these(at idle) without a fan is a bad idea. ===READ SAMS FAQ for more info <(*U*)> hak
 


Back
Top