Any of you guys thought about possibly turning this Maglite® XL50? LED Flashlight into a laser? Could be a good first project for me! Is it even possible to turn it into a laser? :thinking:
Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers
Buy Site Supporter Role (remove some ads) | LPF Donations
Links below open in new window
FrozenGate by Avery
Any thoughts on this?
- Thread starter Rewkie
- Start date
ARG
0
- Joined
- Feb 27, 2011
- Messages
- 6,772
- Points
- 113
Yup, it's possible to turn into a laser. You just have to find someone to machine a heat sink for it.
If it's your first project it may be easier to start with something that's already available like the C6 so you don't have to figure out how to mount the driver and battery contact in that host.
If it's your first project it may be easier to start with something that's already available like the C6 so you don't have to figure out how to mount the driver and battery contact in that host.
ARG
0
- Joined
- Feb 27, 2011
- Messages
- 6,772
- Points
- 113
Go for it then! :beer: Having the tools to make your own heat sink is a huge advantage when building lasers.
Blord
0
- Joined
- Dec 24, 2007
- Messages
- 5,356
- Points
- 0
If you want challenge why don't you make a whole laserhost instead of just a sink. 
Last edited:
- Joined
- Feb 24, 2012
- Messages
- 29
- Points
- 1
Keep in mind that this flashlight is tiny, so it will become hot fast, not good for the diode
hoo7h
0
- Joined
- Aug 15, 2012
- Messages
- 250
- Points
- 28
- Joined
- Sep 20, 2008
- Messages
- 17,635
- Points
- 113
That is not really accurate...
I've seen no mention of the power output of the Laser
he wants to build.
There would be no heat build up problems with let's
say up to a 100mW to 200mW build...
He did say it was his 1st project.
Jerry
You can contact us at any time on our Website: J.BAUER Electronics
Last edited:
