- Joined
- Aug 25, 2010
- Messages
- 533
- Points
- 63
A big hello to all the forum users from Italy!
A lot of times ago, surfing over internet, I have reached this cool forum and then I have discovered the beautiful creations from a guy called Jayrob.
So, I have ordered a lot of items from him and other good diodes from o-like, High Tech DealZ and other affordable guys found in this forum.
Tonight I have done some good photos to show to the forum users what I have built with those nice items!
This is a shot of the three availables colours lasers built with the modified Aurora Stainless Steel 18650 kit by Jayrob: a non focusable 200 mW very thin and bright green laser (diode from o-like), a well focusable and powerfull 350 mW red laser (diode from High Tech DealZ) with a copper heatsink and 650-G1 lens, and a 800 mW blue laser (diode harvested from a Casio Projector) with a copper heatsink and AixiZ 405 glass lens. With the help of Andrea Petrone from Fill-Up industries and Plexishop Italy I have created a sort of laser carrier in a double-coloured plexiglass base with four holes, with diameter slightly bigger than the torch diameter, so the lasers fit perfectly inside the holes.
This is another shot with inserted also an original Aurora Stainless Steel torch.
A close view of the plexiglass base.
My creatures in action
The bell tower is located at Longare (Vicenza), at about 250 meters from the lasers.
Sorry for the unfocused rattling image, but only the camera was mounted on a tripod ... all the lasers was carried in my poor shaking hands
Hope this little tribute like to the forum users, especially to the guyz that allowed the creations of this little masterpiece.
A big hello also goes to Luca Chemello aka Cap. Zicco from Longare (VI) for the professional camera shots and for the infinite patience to hearing again my neverending jokes))
Richard.
A lot of times ago, surfing over internet, I have reached this cool forum and then I have discovered the beautiful creations from a guy called Jayrob.
So, I have ordered a lot of items from him and other good diodes from o-like, High Tech DealZ and other affordable guys found in this forum.
Tonight I have done some good photos to show to the forum users what I have built with those nice items!
This is a shot of the three availables colours lasers built with the modified Aurora Stainless Steel 18650 kit by Jayrob: a non focusable 200 mW very thin and bright green laser (diode from o-like), a well focusable and powerfull 350 mW red laser (diode from High Tech DealZ) with a copper heatsink and 650-G1 lens, and a 800 mW blue laser (diode harvested from a Casio Projector) with a copper heatsink and AixiZ 405 glass lens. With the help of Andrea Petrone from Fill-Up industries and Plexishop Italy I have created a sort of laser carrier in a double-coloured plexiglass base with four holes, with diameter slightly bigger than the torch diameter, so the lasers fit perfectly inside the holes.
This is another shot with inserted also an original Aurora Stainless Steel torch.
A close view of the plexiglass base.
My creatures in action
The bell tower is located at Longare (Vicenza), at about 250 meters from the lasers.
Sorry for the unfocused rattling image, but only the camera was mounted on a tripod ... all the lasers was carried in my poor shaking hands
Hope this little tribute like to the forum users, especially to the guyz that allowed the creations of this little masterpiece.
A big hello also goes to Luca Chemello aka Cap. Zicco from Longare (VI) for the professional camera shots and for the infinite patience to hearing again my neverending jokes
))Richard.
Last edited:
