Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

*********






Re: Help wiring up Tailcap

Not sure exactly what you're asking.

The battery makes contact with the tailcap, and that transfers the positive to the case. You can use the case pin on your diode to hook it up with the driver.
 
Re: Help wiring up Tailcap

Tailcap doesn't need wiring, those 2 holes are for inserting tweezers to unscrew the pill (that way you can change the rubber on the tailcap).
 
Re: Help wiring up Tailcap

You are missing the small round pcb. On this board you solder the switch on one side and a spring on the other side.
 
Re: Help wiring up Tailcap

Thanks for the responses guys, So Then, Where does my positive wire from the module go..?
 
Re: Help wiring up Tailcap

My mistake. This build doesn't need a pcb. The battery plus pole goes toward the switch.
 
Re: Help wiring up Tailcap

A reminder. The LPC626 diodes are case negative. You will be having a hard time to match that with a case positive host.
 
You must log in or register to reply here.


Back
Top