Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

630mW 445 Keychain CR2 Jayrob Kit Review/Build Tutorial

10 months later.......LOL. I actually just ordered one of these kits from Jayrob last night. Not sure if I should go 405nm or 445nm
 





lol almost as strong as an arctic :na:Great build!

greetings,,

EDIT: just to show how crappy an arctic is lol
 
Last edited:
Beautiful!! I've a weakness for the very small laser pointers, which are nonetheless very powerful. A fun gadget to showoff to friends.

My two favorite light toys below: pocket mini red, and muyshondt aeon flashlight. Both easily pocketable.

mini_and_aeon.jpg
 
what diode did you use DTR? becuase i cant find a mention of the used diode in the thread at all
 
Yea this is an older build so it was done with an A140 but it does not matter A140/M140/H1600 they will all work in this exact same setup.;)
 
Would you mind posting a complete list of the links needed for buying the parts?
I really want a DIY laser, and this is awesome
 
sure why not
https://sites.google.com/site/dtrlpf/home/diodes/445-m140-didoes-diode
http://www.cajunlasers.com/store/
misc crap for making
http://mohgasm.com/index.php?main_page=index
boost driver(if you want a good starter host/heatsink go for a c6 shell and matching heatsink) or if there not in stock PM flaminpyro he has the flexdrives but the cost 25$ instead of 10$
http://laserpointerforums.com/f64/fs-key-chain-cr2-build-kit-schweet-42773.html-featured host
and for batteries-http://www.lighthound.com/AW-RCR123a-Protected-750-mAh-Battery_p_114.html
PM me if you have any questions
 
Last edited:
sure why not
https://sites.google.com/site/dtrlpf/home/diodes/445-m140-didoes-diode
Cajunlasers Store
misc crap for making
Mohgasm!, Because it feels so good.
boost driver(if you want a good starter host/heatsink go for a c6 shell and matching heatsink) or if there not in stock PM flaminpyro he has the flexdrives but the cost 25$ instead of 10$
http://laserpointerforums.com/f64/fs-key-chain-cr2-build-kit-schweet-42773.html-featured host
and for batteries-http://www.lighthound.com/AW-RCR123a-Protected-750-mAh-Battery_p_114.html
PM me if you have any questions

The links you posted are broken for some reason.;)


I would talk to Jayrob before getting a new ben boost for this host. It is a very tight squeeze with a Flexdrive and it may not fit the ben boost. Either way Jay can help you figure it out.
http://laserpointerforums.com/f64/fs-key-chain-cr2-build-kit-schweet-42773.html#post562715

Here are the links to my diodes that seemed broken in the last post.;)
https://sites.google.com/site/dtrlpf/home/diodes/445-m140-didoes
 
I built a 635 in one of these hosts, and I cant tell you its a very tight fit. No way you would get a ben boost in there.
 
Yeah it's a bit of a tight squeeze even with a FlexDrive as the pictures in my thread show...

But another thing that makes a difference, is to use the RCR2 battery that I have linked there.

There are different length CR2's, and that one is the shortest rechargeable CR2 in the 4.2 volt full charge size that I have found...
 
yea definitely not a beginners build maybe you should just do a c6 or a guidsmen or a something similar
 





Back
Top