Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

473nm laser parts SOLD

yobresal

yobresal

0
Joined
Nov 5, 2007
Messages
4,919
Points
83
Well I decided to see how this things ticks and have successfully destroyed it. You will need a new driver and possibly a new C-mount not sure as I have yet to test the C-mount with any other driver. This is the crystal assembly. You can see where the C-mount easily screws in and out. The focusing part of the assembly is in the head of the host. This would be an interesting project for someone who is really bored.
Asking $50 shipped.
img0333h.jpg

img0334u.jpg

img0335p.jpg
 





Re: 473nm laser parts

Curse you! I has no money...wait, didn't you JUST get this three days ago?

Edit: @Ranged, even so, it's a very good deal
 
Re: 473nm laser parts

Uhm what was it putting out and why in gods name did you take it apart and what caused it to die?
 
Re: 473nm laser parts

Yeah it is boblasers crap. It was 5mW. I opened it up and in the process the driver solder joints came undone. Why did I open it? I was curious to see what was inside and wanted to try and get it a pot mod. I then destroyed the driver trying to solder while drinking. Not a good idea. I had it all soldered back up but it would not even light up the diode. A new driver and diode would get this working for sure.
 
Re: 473nm laser parts

Okay Proto If you want this I can hold it for you while you get $50 together.
 
Re: 473nm laser parts

Any idea what wavelength diode? I definitely may be interested.

Well actually, if possible, wavelength, voltage, overall specs, current, etc.
 
Last edited:
Re: 473nm laser parts

They use 808nm pump diodes. Voltage is 3. Current depends on a lot of things. I would start low and ramp it up until blue comes out.
 
Re: 473nm laser parts

Any idea what power diode would be sufficient? I have two, 2W 808nm 9mm diodes, but maybe I can do some modification tweaks or something, or else buy a c-mount from herru. If it only needs like 1W or something, then I would probably buy it.
 
aaaaargh!
too late again! ..i tried to get your last blue half-dead module too..
anyway, if slipstream changes his mind, i'd like to get it!
..if you have blue (or yellow?) up for sale again.. care to ask me? :-)

manuel
 
You must log in or register to reply here.





Back
Top