Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

*445nm lasers* !GB-Closed!

Re: *445nm lasers* !diodes 38.50$!

Put a blob of solder over the positive pin stub so that the pin is connected to the case of the diode. Now you can use the pin that is cut shorter as your positive lead, or you can just use the housing of your diode as +.
 





Re: *445nm lasers* !diodes 38.50$!

Kiyoukan,

I sent you the funds for my two items. :D

:thanks:
 
Re: *445nm lasers* !diodes 38.50$!

I managed to snip the plastic pin spacer away without removing the shorting wire and without stressing any of the pins.

The most effective place to cool this package would be on the face that the wires come out of. You'd have to have some fine holes to let the (insulated) wires out through. Does anyone heatsink diodes that way?
 
Re: *445nm lasers* !diodes 38.50$!

/\ I haven't seen anyone go through the trouble to heatsink via the back plate but I would love to see people start.

So far I only use deeper diode pockets.
 
Re: *445nm lasers* !diodes 38.50$!

styropyro said:
Put a blob of solder over the positive pin stub so that the pin is connected to the case of the diode. Now you can use the pin that is cut shorter as your positive lead, or you can just use the housing of your diode as +.
Click to expand...

In the end I might just have to do that. As it is, I'm already resigned to using it as a labby only, on a beefy heat sink. Originally, it was going into a host-negative light, but the solder connection if I keep it isolated from the case is just too fragile.

I don't know how I did it, I wasn't using tweezers or pliers or anything, just my fingers, and just to test how smoothly the spacer would slide...
 
Re: *445nm lasers* !diodes 38.50$!

I'm glad I didn't cut a pin when I yanked off the diode spacer on my last build, that would have sucked. Thanks for letting us know that this can happen, I'll be more careful next time.
 
Any one hear from kiyoukan? Still no package, and he wont reply to my PM asking when he sent it.
 
I last spoke to him 07-16 (also when he last posted here).
My package hasn't arrived but I did tell him no rush at all on mine.

~EDIT~
Found this in his Visitor Messages kiyoukan/#vmessage3342
kiyoukan 07-16-2010 08:56 PM
i am gone till late sunday....
yawn back and alive.
Click to expand...
He may show as online after that but I'm guessing its via a cell. Perhaps hes not checking pms from his cell.
~EDIT~ Doh. Might help me to look at a calendar... Just call me calendar challenged.
 
Last edited:
Yeah I saw that. Thats was on Fri the 16th. I PMd him on Mon 19th, and he logged on noon yesterday the 20th.
 
Got mine yesterday in Germany.

Could not resist and powered it up quick and dirty and I have already seen some blue photons @ 300mA. After a second or two this thing becomes damn hot, so better don't try unmounted. Luckily mine has survived that w/o heat sink. Hopefully it has not suffered permanent degradation now.

Kiyoukan, the packaging was excellent and the diode might have even survived an airplane crash. Thanks a lot for all the hassle :gj:
 
okay some packages did not get shipped as planned.
I was shipping some of the packages out threw my fathers office carrier but they were small so there was never a problem but when i sent him larger packages aka the parts, he was unable to take them as i found out he rides a motorcycle and was unable to carry them
I got the packages back late last night and will have them in the mail by 6pm today.
i logged on a portable device aka my DS and found it very hard to do anything with answered a few Q but i have been busy.
Once again i am back to my main pc with hopefully the last push to get every thing done with this group buy.
And TJ i am also just sending you the 3 mirrors that survived the extraction for free.
A few others might just find a few random other bits in your package.
i just have to many parts cluttering up my work space and thought some of you might want them.
 
Free random bits!!!! Yay!
Hey TJ aka MrSmileyMan I need a "yay" smiley please.
Can I get an extra "Warranty if removed" sticker? :D I collect 'em. jk

Sorry its been a hassle to get those mailed. Whenever it gets here, it gets here. All good.
 
hey kiyoukan, this is gordon porter. i have posted, sent pms, and you never reply!
i realize i have a low post count, but i am a long time enthusiast, 47, and safe. if you need verification of my paypal credentials, i recently transacted with user kevinmassey.. my records show i sent 70 dollars for 2 lasers. then i missed a few days, i have bad liver. i read you needed more for shipping, and i sent 4 dollars. if he cant see this, would another member please alert him? i had hoped to finish build before canceling arctic. please email me at username here at gmail, or pm me. i am the mr porter that was red on your list of sending xtra , but listed as paid. please respond, i keep seeing all these people getting there diodes, and i can get a response, after listed as paid! :banghead::anyone::sold:
 
ditto! hey dude, i know you, i bought the ehgemus blu from kevinmassey. can he see me because of low posts or what? i want my diodes!!!!!!!!!!!!
 
You must log in or register to reply here.


Back
Top