Search results

I guess I did not specify the delivery methods for the swap diode and for a shipping label. For labels I always send via email in the original PDF format. Just print and stuff in the pouch after you seal the package back up with the unit you are swapping. That way the customer can print when...

Here you go. Just about every diode with the exception of the PLT5 510 that I have in stock at the moment will work with this pinout. Ignore the case pin on the NUB/NUG diodes and use the notches to orientate.:)

Yes it is a pull from a new machine. There is an artifact that forms on the glass and gets more prominent the more it is used. It can be seen in the raw output when shined on a wall. I will try to find one and get a pic.

Nice. So when you get the one I am sending you which is a pull from a Mitsubishi core test the wavelength and compare to the the one you are holding and maybe some basic efficiency numbers as well. A interesting point with Ncha diodes is that pulls will be more consistent where diodes...

In china copper demand is higher than the ability to produce or import and very commonly sold and bought by high volume low cost machine shops is whats called ultra low grade copper is used to cut costs. From what I have been told it is made from a mix of waste ore which is very high in...

Going out today.:beer:

Thanks guys. I really needed to take a step back for a bit to collect myself. Was just going to many directions juggling too many balls in the air at once and had sheer exhaustion. Ebay and amazon will stay down for a bit other than maybe some of the non related items like remotes, fans and DLP...

Thanks for all the supportive messages over the last couple weeks guys. I really appreciate it. As some of you know and some have observed over the last six or so months it has been getting harder and harder to keep up with the ever increasing volume and had a brown out several weeks ago due to...

Looking good.:beer:

Diagram shows case positive.

Interesting note. Copper core on these. Might be on other diodes will have to check some dead ones laying around and see what others have this.

Added often requested measurments for the 20mm as well as the 5.6mm and 25mm untis.:)

Actually a little concerned now. Have not talked to will in a bit but figured shoot him a heads up to head over and reply but got this. It is strange. ------------------- Recipient inbox full Your message couldn't be delivered to will@laser66.com. Their inbox is full, or it's getting too much...

Yea I am aware of them but have not used them in the past but see them mentioned positively over on CPF quite often when doing battery research. Selection and pricing based on a quick search are comparable with Illumination Supply as well as the limited info on the cells they offer. The owner...

Yea since Paul noted they are all case positive now, the 510 connector uses the body to carry ground and the case negative way you have it set up it is shorting as soon as the 510 adapter is screwed on. You could switch it around and have the ground be positive, reverse the direction of the...

Yea sorry my internet has been down or at best like dial up since late last ween due to high load so been a bit disconnected. Yea you mentioned on a 505nm build for a 510 host it works when you try connecting wires to the contacts of the adapter but when you screw it into the mech mod it will...

That does look pretty blueish for the 505nm diodes and if it was one of the ones from me they were usually landing about 508nm. Can you get a pic of the number on the top of the can around the window?

Would love to see some new custom hosts for the 21700 cells. Looks to me like the ecig community will probably aggressively adopt and push the end user availability of these cells outside of commercial applications. 26mm cells are a bit fat to be comfortable to hold for the tube based ecigs...

It is doing alright. Still a big knot under the skin but not puffed up or discolored anymore.