Recent content by Lazer Envy

So I have a 3405 host with a microboost, with an 18650, and all of the sudden It starts turning off about 15 seconds into the duty cycle? Is it just running out of batteries? Thank you.

Okay, so what should I be expecting in terms of power output and current input?

Re: Red Diode from BDR-205 sled What's an LOC? And hows it different from a SMOC?

Re: Red Diode from BDR-205 sled Yeah your right I had my wires crossed, it was from the phr 803t. What current and driver are you running to get 260 mw?

So, I've been driving my red laser diode from the XBOX HD-DVD sled with an LM 317, just to prove I could extract the diode in a working condition, but I haven't really jacked up the power on the diode. I wondered what kind of optical power I would be able to get out of that diode 'safely'..what...

How bad should I be worried about heatsinking the driver at 600 ma?

Anyone know if you can use a micro flex drive v5 with about 600 ma of current? Thanks.

Why is everyone in a 3d or no 3d conversation? The obvious choice would be FOR 3d because its gonna drive blu ray lasers forward and make them more powerful, for that reason alone, go 3d. Its not like 3d is gonna phase out 2d, that will never happen. Too many people are nausiated by 3d to make...

Anyone else think this could mean 16x 405 nm?

As for the aixiz module, im not worried, I have a lathe, and I can custom build heatsink for direct press. As for the other stuff, thats kind of a deal breaker for the price and divergence.

So I was checking at cni lasers for diodes and I found some 635 diodes they say are capable of power from 150- 750 mw. ( they sell three different powers) . Now would this be worth trying a DIY build out of?

So I was searching YouTube about 635 NM lasers, and I noticed this place jetlasers.com and they claim to have a 635 NM portable laser capable of 400 mW, unless I didn't read it right but here's the link. Let me know what you think. ¤Handheld Lasers C - Jetlasers

What if there was a heatsink with a specific internal diameter where you could press the diode straight into? It would be a press fit, just like the aixiz module, but the heatsink itself would be threaded for a specific glass lens. Could this be done? And in the interest of heatsinking wouldn't...

So, I'm looking into building a 405 or 445 and I'm looking into the modules. First off do I need the standard aixiz 12 mm module? Second of all, for the 445 build do I want their UV (405) glass lens to be half threaded or full threaded and what does that really mean? And should I waste my time...

http://laserpointerforums.com/f64/fs-diy-green-kit-host-heatsink-easy-assembly-22520.html