C3 Razor (1.6w 450nm) Any recommendations for batteries?

[Skoic]

Just got my laser and forgot to order a battery to go with it! Any recommendations for brands of batteries?

Needs to be: 14500 3.7v button top, unprotected cell capable of at least 3A CONTINUOUS

Edit: Found a battery, not sure if this would work or not \/

14500 3.7V 800mAh Li-Ion Rechargeable Battery - found on Aus Electronics Direct​

 

[RedCowboy]

Vapcell H10 INR14500 1000mah 10A high drian 14500 Battery

Vapcell H10 INR14500 1000mah 10A high drian 14500 Battery For FWAA

www.nealsgadgets.com

Vapcell H10 14500 Purple/White 10A Flat Top 1000mAh Battery - Genuine

Looking for a button top version? You can find it here! *Please note that the voltage of this cell is 3.6V, so your device must be made to handle the higher voltage (Alkaline AA are only 1.5V). Vapcell direct. These batteries are direct from Vapcell. Priced per battery, not per pair. Vapcell...

liionwholesale.com

Vapcell H10 INR14500 1000mah 10A High Drain Rechargeable Flat Top Battery

Specifications: Model INR14500 H10 Size 14.3*49.4mm Type Flat top Nominal voltage 3.60V End-of-charge voltage 4.20V End-of-discharge Voltage 2.50V Typical Capacity 1000mAh (0.2C discharge) Min capacity 900mAh (0.2C discharge) Weight Max:24g Internal resistance...

www.brightlumenshop.com

 

[zigzag123]

Stay away from any "UltraFire" or any battery name that ends with the word "Fire".
Lookss like Aus Electronics Direct doesn't sell any ****Fire brands so thats good.
Looks like you found what you need there.

Also if there are any vape shops near by you can usualy find batterys there.

 

[Skoic]

Which one of these is the best? Or does it not really matter @RedCowboy

 

[Skoic]

Stay away from any "UltraFire" or any battery name that ends with the word "Fire".
Lookss like Aus Electronics Direct doesn't sell any ****Fire brands so thats good.
Looks like you found what you need there.

Also if there are any vape shops near by you can usualy find batterys there.

Cheers mate, I’ve got 2 crappy chinese lasers that came with ultra fire batteries, not really bothered about those but I wanna take dare of my c3 razor as it’s heaps better than the Chinese ones

 

[Skoic]

As for the Vapcell H10 14500, it says 10A whereas Jlasers said 3A is this gonna be an issue?

 

[RedCowboy]

As for the Vapcell H10 14500, it says 10A whereas Jlasers said 3A is this gonna be an issue?

No, over capacity is no problem, it's an attribute.

Which one of these is the best? Or does it not really matter @RedCowboy

I suggest the Vapecell H10 14500 from the seller with the best price that has them in stock, that said I can vouch for LION BATTERY as I know I have bought from them...... However nealsgadgest ( the 1st listing ) looks like a good price, but shipping for me was estimated at 8 dollars, however they offer free shipping with a 50+ dollar order, still 12.95 with the shipping is not unreasonable, your price per unit will be lower if you buy several.

 

[Skoic]

No, over capacity is no problem, it's an attribute.

I suggest the Vapecell H10 14500 from the seller with the best price that has them in stock, that said I can vouch for LION BATTERY as I know I have bought from them...... However nealsgadgest ( the 1st listing ) looks like a good price, but shipping for me was estimated at 8 dollars, however they offer free shipping with a 50+ dollar order, still 12.95 with the shipping is not unreasonable, your price per unit will be lower if you buy several.

I think I'll order directly from Vapcell, their shipping to Australia is way cheaper than from the US

Vapcell 14500 H10 1000mah 10A

 

[loreadarkshade]

Thank you for buying my products!
Remember that we offer lifetime warranty should you ever need it

 

[Skoic]

Thank you for buying my products!
Remember that we offer lifetime warranty should you ever need it

Thanks heaps! Just wondering if it’s normal for the beam to be ever so slightly bent just by the lense?

 

[zigzag123]

Thanks heaps! Just wondering if it’s normal for the beam to be ever so slightly bent just by the lense?

I would think its more from the heatsink hole for the laser module being drilled a little bit off center.

 

[loreadarkshade]

Thanks heaps! Just wondering if it’s normal for the beam to be ever so slightly bent just by the lense?

The cheap acrylic lenses I've been using can be prone to that. I recommend buying a 2E lens which are metal and much better quality. I plan to upgrade all my lasers with 2E lenses in the future, but that will come at a slight cost increase

 

[Skoic]

The cheap acrylic lenses I've been using can be prone to that. I recommend buying a 2E lens which are metal and much better quality. I plan to upgrade all my lasers with 2E lenses in the future, but that will come at a slight cost increase

Ah yep, might have to wait a bit to do that, shipping from CAD to AU is insane