FS: 75$ Sharp laser 490-493nm ~160mW

[thanhtung]

i want to sell this 490-493nm : 75$
- my G2 include
- Not include batteries (2 x 16340)
- Ship 14 usd around the world about 30 days arrived
This itwm was been stock out at this time and come back in stock about 20 days!
Thanks

 

[LewDude]

Good luck on the sale!! Appealing price for that new diode all ready to make pretty light

 

[Gazen]

Good luck on the sale, seems like a good deal since the diodes alone are going for 60-90.

 

[deadshadow]

awesome price tag and hell of a power on this wavelengh,best wishes on your sale,i just completed my build yesterday and set mine at 190ma,i just need some beamshots to make a thread about it

 

[paul1598419]

Good luck on your latest sale. Are you using a linear driver for this one? I would trade the G-2 lens for something that doesn't give that horrid rectangular artifact next to the beam, though.

 

[BobMc]

Sweet! Best wishes. Someone’s going to get a great deal. :drool:

 

[thanhtung]

Good luck on your latest sale. Are you using a linear driver for this one? I would trade the G-2 lens for something that doesn't give that horrid rectangular artifact next to the beam, though.

Yes, i have use linear driver ! Because ax2002 will have a lot of ripples and made down lifetime of diode which bring to us a colour so cool!

 

[thanhtung]

awesome price tag and hell of a power on this wavelengh,best wishes on your sale,i just completed my build yesterday and set mine at 190ma,i just need some beamshots to make a thread about it

Great! You can set your diode at 300mA

 

[deadshadow]

Great! You can set your diode at 300mA

i would do it but im chickening as i don't want to risk and push that much a diode that i bought 70 bucks,if it dies i couldn't afford to buy a new one

 

[paul1598419]

I have recently had one of these diodes at 530 mA for a short period of time. I sent mine at 275 mA and have four other builds for other people set at 275 to 279 mA. As long as you heat sink the diode well, it should be fine at 300 mA. I would use a copper module and use a modest heat sink like in the old 501B hosts.

 

[JimK]

Very photogenic wavelength. The orange and blue exposure photography is just gorgeous.

GLWS.

 

[thanhtung]

I have recently had one of these diodes at 530 mA for a short period of time. I sent mine at 275 mA and have four other builds for other people set at 275 to 279 mA. As long as you heat sink the diode well, it should be fine at 300 mA. I would use a copper module and use a modest heat sink like in the old 501B hosts.

yes, i agree with you !
you need only a good heatsink for diode, you can set at 300mA! but don't should too high, because your diode will be zoombie:evil:

 

[Sta]

I think I should buy this one too... :undecided:

 

[thanhtung]

I think I should buy this one too... :undecided:

You are welcome! I have only last item 490nm

 

[Sta]

aypal:

 

[thanhtung]

aypal:

Yes, thank very much! Pp rêcived
I will up number tracking as soon as when i send it to you!