- Joined
- Oct 13, 2010
- Messages
- 340
- Points
- 28
Now, since my first gen Arctic was one of the rushed ones, it died the next day. I haven't had my new one for 24 hours yet, but let's hope that Wicked Lasers has learned something in the past 3 years. I won't be posting pictures on this review since all I have is a crappy Sony Cybershot DSCW200, but I will post 2 screenshots. And i'm tired from work, so this review might seem a little short and to the point.
The Wait
I placed my order with Wicked Lasers on May 9. After 3 days of nothing really updating, I decided that maybe they were just a little slow on the draw. After 3 more days, what the hell? I emailed them and they replied that day that it had already shipped.
After they finally gave me my tracking number, I started tracking it with USPS. As you can see above, the first instance of anything happening on the U.S side is on May 14. That information didn't show up until May 16. I called the post office on May 21, and they had no idea what was going on with my package. Wicked Lasers sent me a link to Packagetrackr to track my shipment. Don't rely on Packagetrackr. They will show you up-to-date info one minute, and then the rest of the time, they'll show you info from when they first started tracking your shipment.
But back to USPS. I noticed that customs didn't really have much to do this time around, and even Packagetrackr showed that customs must've just skipped it over. After May 23, everything started to update regularly until it arrived while I was at work. Good thing my dad was visiting and could sign for it.
The Package
Ugly blue-green bag with some black marker writing on it, and a USPS sticker. Inside was a white paper bag that's lined with bubble wrap. Inside that was a big mass of bubble wrap. Inside that was the laser, which was inside of its holster, the laser shades, the warning poster, an extra warning sticker, and a smaller mass of bubble wrap which contained the charger with the generic-looking red 18650 batter already in it.
The Gear
I haven't even bothered taking the laser shades out of its plastic wrap. I heard a long time ago about how they sucked, so i'll probably just throw them away.
I'm not sure whether or not to trust the battery that came. I remember hearing about how they're hazardous crap. This one is slightly shorter than the 2 Tenergy 2600 mAh PCB batteries I bought back in 2011(the size difference is a bit smaller the length of the PCB). I'll probably throw it away, just to be safe.
I could care less about the holster, which leaves a bigger portion of the Arctic exposed than I had expected.
The warning sticker shows <2000mW. Why they can't just say ~1000mW is beyond me.
The battery charger that came with it still shows a green light when I try to charge my Tenergys, but the old one from 2010 seems to work. I guess i'll throw away the charger too.
The Laser
I'm not a fan of the SmartSwitch starting my laser in low power strobe. The laser itself feels sturdy and looks good. The inside of the tailcap looks like someone tried to take a minature jackhammer to the silver outer portion, as it's kinda cracked.
I turned it on for the first time and tried to smoke my hoodie to test its power compared to my Spartan 445 1W. It smoked it pretty quick, and then I forgot that I still had it on low-power continuous mode. The lens caps I received with my first Arctic don't fit this one, so I guess they updated the threading, which means that I need to get a lens kit.
The Problems
The divergence on this thing is retarded. I measured exactly half an inch at 5 feet. I can even tell the spread is bad when I shine it into the night sky. The main thing that worries me is that the round black part underneath the lens cap moves around. I screwed it a little tighter with the hook of a fingernail file, but it still moves. I just think that if I move the laser a bit too fast, the unstable part might knock against the host and knock something out of line. Call me paranoid, but I just don't trust sensitive parts that aren't affixed to something.
Miscellaneous
I'm just going to go ahead and call bullshit out of principle.
Final Thoughts
I've known about all of the Wicked Lasers hoopla for a while. I know it was risky buying another one, after most people who came forward about their Arctic complained about it being underspec, but after getting a total piece of crap back in 2010, I was curious enough to take a gamble on how much Wicked Lasers has improved over the past 3 years. I played russian roulette, and while I didn't get the bullet, my gun is now scratched. I guess the pros outweigh the cons for me. I don't know how much a ~200mW difference would make in burning power(seeing as how many Arctics are at least 200mW underspec), but either the Arctic I have is near specification, or time speeds up slightly when I use it. I've always liked the host design, and how sturdy it feels. I do wish that the divergence was similar to my Spartan, and I get a little scared whenever the inside part moves around, but I can say that i'm happy with my purchase. I plan on getting a 1W Krypton in a few weeks, but I might just get it from an LPF member who's measured theirs at close to 1W.
Update - Just tested out my Arctic again, and now it measures a full inch at 5 feet. I can't even.
Update 2 - I screwed the cap above the collimation lens as tight as I could with the hook of a fingernail file, and now it stays in place. Before I did that, the divergence had lowered to half a centimeter at 5 feet and has stayed there.
The Wait
I placed my order with Wicked Lasers on May 9. After 3 days of nothing really updating, I decided that maybe they were just a little slow on the draw. After 3 more days, what the hell? I emailed them and they replied that day that it had already shipped.
After they finally gave me my tracking number, I started tracking it with USPS. As you can see above, the first instance of anything happening on the U.S side is on May 14. That information didn't show up until May 16. I called the post office on May 21, and they had no idea what was going on with my package. Wicked Lasers sent me a link to Packagetrackr to track my shipment. Don't rely on Packagetrackr. They will show you up-to-date info one minute, and then the rest of the time, they'll show you info from when they first started tracking your shipment.
But back to USPS. I noticed that customs didn't really have much to do this time around, and even Packagetrackr showed that customs must've just skipped it over. After May 23, everything started to update regularly until it arrived while I was at work. Good thing my dad was visiting and could sign for it.
The Package
Ugly blue-green bag with some black marker writing on it, and a USPS sticker. Inside was a white paper bag that's lined with bubble wrap. Inside that was a big mass of bubble wrap. Inside that was the laser, which was inside of its holster, the laser shades, the warning poster, an extra warning sticker, and a smaller mass of bubble wrap which contained the charger with the generic-looking red 18650 batter already in it.
The Gear
I haven't even bothered taking the laser shades out of its plastic wrap. I heard a long time ago about how they sucked, so i'll probably just throw them away.
I'm not sure whether or not to trust the battery that came. I remember hearing about how they're hazardous crap. This one is slightly shorter than the 2 Tenergy 2600 mAh PCB batteries I bought back in 2011(the size difference is a bit smaller the length of the PCB). I'll probably throw it away, just to be safe.
I could care less about the holster, which leaves a bigger portion of the Arctic exposed than I had expected.
The warning sticker shows <2000mW. Why they can't just say ~1000mW is beyond me.
The battery charger that came with it still shows a green light when I try to charge my Tenergys, but the old one from 2010 seems to work. I guess i'll throw away the charger too.
The Laser
I'm not a fan of the SmartSwitch starting my laser in low power strobe. The laser itself feels sturdy and looks good. The inside of the tailcap looks like someone tried to take a minature jackhammer to the silver outer portion, as it's kinda cracked.
I turned it on for the first time and tried to smoke my hoodie to test its power compared to my Spartan 445 1W. It smoked it pretty quick, and then I forgot that I still had it on low-power continuous mode. The lens caps I received with my first Arctic don't fit this one, so I guess they updated the threading, which means that I need to get a lens kit.
The Problems
The divergence on this thing is retarded. I measured exactly half an inch at 5 feet. I can even tell the spread is bad when I shine it into the night sky. The main thing that worries me is that the round black part underneath the lens cap moves around. I screwed it a little tighter with the hook of a fingernail file, but it still moves. I just think that if I move the laser a bit too fast, the unstable part might knock against the host and knock something out of line. Call me paranoid, but I just don't trust sensitive parts that aren't affixed to something.
Miscellaneous
I'm just going to go ahead and call bullshit out of principle.
Final Thoughts
I've known about all of the Wicked Lasers hoopla for a while. I know it was risky buying another one, after most people who came forward about their Arctic complained about it being underspec, but after getting a total piece of crap back in 2010, I was curious enough to take a gamble on how much Wicked Lasers has improved over the past 3 years. I played russian roulette, and while I didn't get the bullet, my gun is now scratched. I guess the pros outweigh the cons for me. I don't know how much a ~200mW difference would make in burning power(seeing as how many Arctics are at least 200mW underspec), but either the Arctic I have is near specification, or time speeds up slightly when I use it. I've always liked the host design, and how sturdy it feels. I do wish that the divergence was similar to my Spartan, and I get a little scared whenever the inside part moves around, but I can say that i'm happy with my purchase. I plan on getting a 1W Krypton in a few weeks, but I might just get it from an LPF member who's measured theirs at close to 1W.
Update - Just tested out my Arctic again, and now it measures a full inch at 5 feet. I can't even.
Update 2 - I screwed the cap above the collimation lens as tight as I could with the hook of a fingernail file, and now it stays in place. Before I did that, the divergence had lowered to half a centimeter at 5 feet and has stayed there.
Last edited: