WTB burning laser kit

[flame_minion]

i would like to buy everything i need to make my own burning laser
i need everytying but the host and heatsync as i can do my own metalwork
please pm or e-mail with a part list and quote
i hope to make it as powerful as possible and focousable also stable, i dont want it to burn out
price range +/- 100 if that price is too low plese let me know
Thanks,
Tyler Huntley

 

[iewed]

Assuming you already have a soldering station and a multimeter, you would need a

This=$27
and
This=$20

You might want to buy a couple diodes (2-3) in case you kill one by soldering the driver to the diode.
I believe people run their diodes around 300mA.

If you want a violet instead, you'll still need the Aixiz module, but you would buy a PHR-803T diode from one of the forum members.
I wouldn't recommend going above 150mA with the PHR-803T unless you have very nice heatsinking (No more than 180mA with good heatsinking). The PHR-803T diode will give you about 130mW's+, the Sony diode 200mW's+. If you want to burn things you'll definitively need some safety glasses.

 

[DJenky]

The link on those are only bringing up to the Stonetek.org website it's not pulling up anything specific.

 

[tonyt]

The link on those are only bringing up to the Stonetek.org website it's not pulling up anything specific.

Ahhhh... hmmm... Me too? Are you sure it's .org??

 

[bloompyle]

Well this thread is 5 years old, and this is your first post.

Stonetek died a while ago.

Introduce yourself in the welcome section, and don't necro post.

 

[tonyt]

Well this thread is 5 years old, and this is your first post.

Stonetek died a while ago.

Introduce yourself in the welcome section, and don't necro post.

Oh wow, sorry bloompyle!! I didn't even notice the OP date!

Disregard my previous post.