Hiemal
0
- Joined
- Dec 27, 2011
- Messages
- 1,443
- Points
- 63
Hey all!
I was downstairs, and was picking through the stuff I won't need...
http://i.imgur.com/CR1af.jpg
Some assorted fans, smaller ones are $2 each, larger, $4 each
http://i.imgur.com/q00Ys.jpg
Isotop mosfets, e40nk90zd ... $8 each, I won't ever ever use them...
http://i.imgur.com/8OOLq.jpg
Tiny 5 volt SMPS, just supply 120 vAC to it and bam instant 5 volt supply. (I do not know the max current, however)
I need to add a 100 ohm resistor onto it before I sell it. Remind me if you decide to buy it!
$5 for it
http://i.imgur.com/lWwa4.jpg
little bigger SMPS... Supplies 15 volts at 1 amp, if memory serves me correct.
$6 for it
http://i.imgur.com/NE6Bv.jpg
Even bigger 5 volt supply. Can give out +5 volts at 3.5 amps, or -5 volts at 2.5 amps. I can give you the pinout if you wish to buy it.
$10 for it.
http://i.imgur.com/qgHvi.jpg
A Stanley Recon Mica cap. .25 uF, rated at 1000 volts peak. Great for a variety of things.
$5 for it!
http://i.imgur.com/Ao0R0.jpg
Small electrolytic caps; rated at 150 vDC, 560 uF.
Asking $4 for each of them
http://i.imgur.com/TWoEz.jpg
Bigger electrolytics; Rated at 350 uF (though, I measured them with a C meter, and they're actually above that still!) Can handle 450 vDC, great for filtering and coilguns too!
Asking $3 each.
http://i.imgur.com/2qpcU.jpg
These electrolytics are the same size as the previous ones physically. However, they are rated at 550 uF, and can handle 250 vDC. Also great for filtering!
http://i.imgur.com/1bsKa.jpg *NEW*
Maxwell Ultracapacitor. 2600 Farads, at 2.5 volts, this thing is a beast. It can melt steel, weld, and a whole bunch of other things too.
I'm asking $22 for it, and shipping is probably going to be a good 8 - 10 dollars for US buyers.
http://i.imgur.com/y8PeM.jpg *NEW*
Two very large and very nice RIFA capacitors. Perfection for coilgunners. Together they equal a nice 528 joules. (half a kJ!)
I'm asking $17 for each cap. Shipping for these big guys is probably going to be a bit more than most of my other items.
PM me if you'd like to make offers, or trades for any of the above items. I'll be pretty flexible with pricing, so please, ask! I'll also LOVE to do trades, specifically for laser related items. I do have more semiconductors, so please ask if you need something specific.
And, as before, I also build ZVS drivers for $25 per. (no flyback included)
And a new thing I'm building, a wireless power demonstrator! Show it off to your friends and family and show the miracle of wireless power transfer! It can either (simple version) light up an LED, or... more expensive, charge USB devices. $35 for simple, and $50 for the USB one (I have to add a buck converter to the USB one). They are battery powered. I can include a small explanation of how it works if you'd like!
USA only.
Thank you for taking the time to read! :san:
UPDATED PRICING
I was downstairs, and was picking through the stuff I won't need...

http://i.imgur.com/CR1af.jpg
Some assorted fans, smaller ones are $2 each, larger, $4 each
http://i.imgur.com/q00Ys.jpg
Isotop mosfets, e40nk90zd ... $8 each, I won't ever ever use them...

http://i.imgur.com/8OOLq.jpg
Tiny 5 volt SMPS, just supply 120 vAC to it and bam instant 5 volt supply. (I do not know the max current, however)
I need to add a 100 ohm resistor onto it before I sell it. Remind me if you decide to buy it!
$5 for it
http://i.imgur.com/lWwa4.jpg
little bigger SMPS... Supplies 15 volts at 1 amp, if memory serves me correct.
$6 for it
http://i.imgur.com/NE6Bv.jpg
Even bigger 5 volt supply. Can give out +5 volts at 3.5 amps, or -5 volts at 2.5 amps. I can give you the pinout if you wish to buy it.
$10 for it.
http://i.imgur.com/qgHvi.jpg
A Stanley Recon Mica cap. .25 uF, rated at 1000 volts peak. Great for a variety of things.
$5 for it!
http://i.imgur.com/Ao0R0.jpg
Small electrolytic caps; rated at 150 vDC, 560 uF.
Asking $4 for each of them
http://i.imgur.com/TWoEz.jpg
Bigger electrolytics; Rated at 350 uF (though, I measured them with a C meter, and they're actually above that still!) Can handle 450 vDC, great for filtering and coilguns too!
Asking $3 each.
http://i.imgur.com/2qpcU.jpg
These electrolytics are the same size as the previous ones physically. However, they are rated at 550 uF, and can handle 250 vDC. Also great for filtering!
http://i.imgur.com/1bsKa.jpg *NEW*
Maxwell Ultracapacitor. 2600 Farads, at 2.5 volts, this thing is a beast. It can melt steel, weld, and a whole bunch of other things too.
I'm asking $22 for it, and shipping is probably going to be a good 8 - 10 dollars for US buyers.
http://i.imgur.com/y8PeM.jpg *NEW*
Two very large and very nice RIFA capacitors. Perfection for coilgunners. Together they equal a nice 528 joules. (half a kJ!)
I'm asking $17 for each cap. Shipping for these big guys is probably going to be a bit more than most of my other items.

PM me if you'd like to make offers, or trades for any of the above items. I'll be pretty flexible with pricing, so please, ask! I'll also LOVE to do trades, specifically for laser related items. I do have more semiconductors, so please ask if you need something specific.
And, as before, I also build ZVS drivers for $25 per. (no flyback included)
And a new thing I'm building, a wireless power demonstrator! Show it off to your friends and family and show the miracle of wireless power transfer! It can either (simple version) light up an LED, or... more expensive, charge USB devices. $35 for simple, and $50 for the USB one (I have to add a buck converter to the USB one). They are battery powered. I can include a small explanation of how it works if you'd like!
USA only.
Thank you for taking the time to read! :san:
UPDATED PRICING
Last edited: