- Joined
- Nov 30, 2008
- Messages
- 428
- Points
- 18
;D
It was GREAT!!!!
cost: 135 USd
Appearance:
It was in a nice hobby box, even though i only askes for the parts soldered toegther
has both a momentary and switch on switch off switch
only con was that the module was sticking out of the front a little
Capabilities:
light red matches from 5 up to 1 foot instantly
lights black matches up to 12 feet away in a few seconds
pops all dark balloons, including green blue and black
pops black balloons up to 15 feet away
brilliant dot in night and day
beam visible in dusty conditions and looks incredible in smoke and flour
burns black plastics up to 6-7 feet away
cuts electric tape in seconds
slices right through trash bags
cut a hole into an egg with a black dot :
burns into normal uncolored wood (leaves black dot) at up to 2 feet
Cons: has shorter duty cycle due to lack of metal heat sinking(i just turn it off when it gets hot)
Batteries:
was delivered with 2 lithium 3.6 volt AA size
I ended up using 9 volt alkaline, because it works better
Service:
Justin gave me lots good answers to my questions
and he shipped it in less than 2 weeks
custom built to my specs
gave me extras like switches and hobby box for free
he will replace diode or give refund if it breaks within a month
Overall:
Amazing!!! thanks so much Nitroxlasers
go see this company at
www.nitroxlasers.com
It was GREAT!!!!
cost: 135 USd
Appearance:
It was in a nice hobby box, even though i only askes for the parts soldered toegther
has both a momentary and switch on switch off switch
only con was that the module was sticking out of the front a little
Capabilities:
light red matches from 5 up to 1 foot instantly
lights black matches up to 12 feet away in a few seconds
pops all dark balloons, including green blue and black
pops black balloons up to 15 feet away
brilliant dot in night and day
beam visible in dusty conditions and looks incredible in smoke and flour
burns black plastics up to 6-7 feet away
cuts electric tape in seconds
slices right through trash bags
cut a hole into an egg with a black dot :
burns into normal uncolored wood (leaves black dot) at up to 2 feet
Cons: has shorter duty cycle due to lack of metal heat sinking(i just turn it off when it gets hot)
Batteries:
was delivered with 2 lithium 3.6 volt AA size
I ended up using 9 volt alkaline, because it works better
Service:
Justin gave me lots good answers to my questions
and he shipped it in less than 2 weeks
custom built to my specs
gave me extras like switches and hobby box for free
he will replace diode or give refund if it breaks within a month
Overall:
Amazing!!! thanks so much Nitroxlasers
go see this company at
www.nitroxlasers.com