Old 10-11-2011, 03:16 AM #1
Crazyk187's Avatar
Class 2 Laser
 
Join Date: Jan 2011
Location: Fort Wayne, IN
Posts: 284
Rep Power: 12
Crazyk187 is a jewel in the roughCrazyk187 is a jewel in the roughCrazyk187 is a jewel in the roughCrazyk187 is a jewel in the rough
Crazyk187 Crazyk187 is offline
Class 2 Laser
Crazyk187's Avatar
 
Join Date: Jan 2011
Location: Fort Wayne, IN
Posts: 284
Rep Power: 12
Crazyk187 is a jewel in the roughCrazyk187 is a jewel in the roughCrazyk187 is a jewel in the roughCrazyk187 is a jewel in the rough
Default ice cream paint job on my host...

I'm getting my 532 laser custom painted tomorrow.... as a trade from 1 of my friends at an automotive shop. Now what my question is, the procedure is it gets painted and I think he said 80 minutes at 80 degrees to cure out the paint.......

Do you guys think 80 minutes at 80 degrees would compromise any of the electronics???

It is a japanese laser off the internet so I cannot disassemble the interior pieces As they are glued and plus I would not feel comfortable doing so..................

In case anyone was wondering it's getting painted lime green.... the same color as the new camaros!!!!!!!!!!!!

Thanks everybody


__________________
445nm <1500mw Waterproof BOB Custom
405nm <5mW ebay pen
3-mode 405nm <156mw Aruora soon to be 500mw+
640nm <253mw Colmanmax
Crazyk187 is offline   Reply With Quote


















Old 10-11-2011, 03:20 AM #2
jeffreythe00's Avatar
Class 3B Laser
 
Join Date: Jan 2010
Location: USA, Plains, Pennsylvania
Posts: 2,531
Rep Power: 15414
jeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond repute
Send a message via Skype™ to jeffreythe00
jeffreythe00 jeffreythe00 is online now
Class 3B Laser
jeffreythe00's Avatar
 
Join Date: Jan 2010
Location: USA, Plains, Pennsylvania
Posts: 2,531
Rep Power: 15414
jeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond repute
Send a message via Skype™ to jeffreythe00
Default Re: ice cream paint job on my host...

If you are asking if 80F will damage your laser. I would say no. That would be equivalent to a hot summer day. You would not keep your laser in the refrigerator in the summer would you?
__________________
Want to be a part of the member map? Pm me!

Personal lasers
532nm 130mW Spartan
532nm 160mW Wicked lasers EVO
532nm 130mW Wicked Lasers Executive Pro: Nexus

520nm 1.4W Ehgemus custom
660nm >78mW Newwish
635nm 500mW 501B
445nm >1W 1st Gen Kryton Groove
445nm >2.7W DeadEYmo Custom
473nm 25mW re-tuned B&W Tek Labby
Wicked Lasers Torch
Radiant x4 LPM
jeffreythe00 is online now   Reply With Quote
Old 10-11-2011, 03:41 AM #3
Crazyk187's Avatar
Class 2 Laser
 
Join Date: Jan 2011
Location: Fort Wayne, IN
Posts: 284
Rep Power: 12
Crazyk187 is a jewel in the roughCrazyk187 is a jewel in the roughCrazyk187 is a jewel in the roughCrazyk187 is a jewel in the rough
Crazyk187 Crazyk187 is offline
Class 2 Laser
Crazyk187's Avatar
 
Join Date: Jan 2011
Location: Fort Wayne, IN
Posts: 284
Rep Power: 12
Crazyk187 is a jewel in the roughCrazyk187 is a jewel in the roughCrazyk187 is a jewel in the roughCrazyk187 is a jewel in the rough
Default Re: ice cream paint job on my host...

I see what you are saying I am asking 80 degrees fahrenheit for 80 minutes tho..... that is gonna raise the core temperature and everything two 80 degrees!!! I would not leave my laser in direct sunlight for 80 minutes!!!
__________________
445nm <1500mw Waterproof BOB Custom
405nm <5mW ebay pen
3-mode 405nm <156mw Aruora soon to be 500mw+
640nm <253mw Colmanmax
Crazyk187 is offline   Reply With Quote
Old 10-11-2011, 03:46 AM #4
jeffreythe00's Avatar
Class 3B Laser
 
Join Date: Jan 2010
Location: USA, Plains, Pennsylvania
Posts: 2,531
Rep Power: 15414
jeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond repute
Send a message via Skype™ to jeffreythe00
jeffreythe00 jeffreythe00 is online now
Class 3B Laser
jeffreythe00's Avatar
 
Join Date: Jan 2010
Location: USA, Plains, Pennsylvania
Posts: 2,531
Rep Power: 15414
jeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond repute
Send a message via Skype™ to jeffreythe00
Default Re: ice cream paint job on my host...

Direct sunlight would exceed 80F in 80 minutes. However 80F is VERY safe as long as the humidity is low. Which I would assume it would be considering paint can't dry in humid conditions. The components in some lasers will greatly exceed 80F in some conditions anyways. Your laser should be fine as long as you don't get it wet or get paint on the lens.
__________________
Want to be a part of the member map? Pm me!

Personal lasers
532nm 130mW Spartan
532nm 160mW Wicked lasers EVO
532nm 130mW Wicked Lasers Executive Pro: Nexus

520nm 1.4W Ehgemus custom
660nm >78mW Newwish
635nm 500mW 501B
445nm >1W 1st Gen Kryton Groove
445nm >2.7W DeadEYmo Custom
473nm 25mW re-tuned B&W Tek Labby
Wicked Lasers Torch
Radiant x4 LPM
jeffreythe00 is online now   Reply With Quote
Old 10-11-2011, 03:52 AM #5
Crazyk187's Avatar
Class 2 Laser
 
Join Date: Jan 2011
Location: Fort Wayne, IN
Posts: 284
Rep Power: 12
Crazyk187 is a jewel in the roughCrazyk187 is a jewel in the roughCrazyk187 is a jewel in the roughCrazyk187 is a jewel in the rough
Crazyk187 Crazyk187 is offline
Class 2 Laser
Crazyk187's Avatar
 
Join Date: Jan 2011
Location: Fort Wayne, IN
Posts: 284
Rep Power: 12
Crazyk187 is a jewel in the roughCrazyk187 is a jewel in the roughCrazyk187 is a jewel in the roughCrazyk187 is a jewel in the rough
Default Re: ice cream paint job on my host...

Ok cool man just figured I would ask....... because the alternative is just to not touch it for 2 or 3 days......so.

Thanks a lot buddy.

Hey while I have your attention will you look at this for me

http://laserpointerforums.com/f67/i-...nce-67932.html
__________________
445nm <1500mw Waterproof BOB Custom
405nm <5mW ebay pen
3-mode 405nm <156mw Aruora soon to be 500mw+
640nm <253mw Colmanmax
Crazyk187 is offline   Reply With Quote
Old 10-11-2011, 03:56 AM #6
jeffreythe00's Avatar
Class 3B Laser
 
Join Date: Jan 2010
Location: USA, Plains, Pennsylvania
Posts: 2,531
Rep Power: 15414
jeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond repute
Send a message via Skype™ to jeffreythe00
jeffreythe00 jeffreythe00 is online now
Class 3B Laser
jeffreythe00's Avatar
 
Join Date: Jan 2010
Location: USA, Plains, Pennsylvania
Posts: 2,531
Rep Power: 15414
jeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond repute
Send a message via Skype™ to jeffreythe00
Default Re: ice cream paint job on my host...

I took a look before you posted. I can't help you there sorry.
__________________
Want to be a part of the member map? Pm me!

Personal lasers
532nm 130mW Spartan
532nm 160mW Wicked lasers EVO
532nm 130mW Wicked Lasers Executive Pro: Nexus

520nm 1.4W Ehgemus custom
660nm >78mW Newwish
635nm 500mW 501B
445nm >1W 1st Gen Kryton Groove
445nm >2.7W DeadEYmo Custom
473nm 25mW re-tuned B&W Tek Labby
Wicked Lasers Torch
Radiant x4 LPM
jeffreythe00 is online now   Reply With Quote
Old 10-11-2011, 08:52 AM #7
Misanthrop's Avatar
Class 2M Laser
 
Join Date: Aug 2011
Location: England.
Posts: 709
Rep Power: 30
Misanthrop has a reputation beyond reputeMisanthrop has a reputation beyond reputeMisanthrop has a reputation beyond reputeMisanthrop has a reputation beyond reputeMisanthrop has a reputation beyond reputeMisanthrop has a reputation beyond reputeMisanthrop has a reputation beyond reputeMisanthrop has a reputation beyond reputeMisanthrop has a reputation beyond reputeMisanthrop has a reputation beyond reputeMisanthrop has a reputation beyond repute
Misanthrop Misanthrop is offline
Class 2M Laser
Misanthrop's Avatar
 
Join Date: Aug 2011
Location: England.
Posts: 709
Rep Power: 30
Misanthrop has a reputation beyond reputeMisanthrop has a reputation beyond reputeMisanthrop has a reputation beyond reputeMisanthrop has a reputation beyond reputeMisanthrop has a reputation beyond reputeMisanthrop has a reputation beyond reputeMisanthrop has a reputation beyond reputeMisanthrop has a reputation beyond reputeMisanthrop has a reputation beyond reputeMisanthrop has a reputation beyond reputeMisanthrop has a reputation beyond repute
Default Re: ice cream paint job on my host...

I'm in the trade and it won't be 80F it will be 80C...
__________________
Reviews to come...

Lazerer - 2W IR 808
Lazerer - 500mW Greenie
Misanthrop is offline   Reply With Quote
Old 10-11-2011, 11:59 AM #8
foulmist's Avatar
Class 3R Laser
 
Join Date: Mar 2011
Location: Smolyan, Bulgaria
Posts: 1,076
Rep Power: 107
foulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond repute
Send a message via Skype™ to foulmist
foulmist foulmist is offline
Class 3R Laser
foulmist's Avatar
 
Join Date: Mar 2011
Location: Smolyan, Bulgaria
Posts: 1,076
Rep Power: 107
foulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond repute
Send a message via Skype™ to foulmist
Default Re: ice cream paint job on my host...

better leave it to dry for 2 3 days, PATIENCE...young padawan
foulmist is offline   Reply With Quote
Old 10-11-2011, 01:37 PM #9
Crazyk187's Avatar
Class 2 Laser
 
Join Date: Jan 2011
Location: Fort Wayne, IN
Posts: 284
Rep Power: 12
Crazyk187 is a jewel in the roughCrazyk187 is a jewel in the roughCrazyk187 is a jewel in the roughCrazyk187 is a jewel in the rough
Crazyk187 Crazyk187 is offline
Class 2 Laser
Crazyk187's Avatar
 
Join Date: Jan 2011
Location: Fort Wayne, IN
Posts: 284
Rep Power: 12
Crazyk187 is a jewel in the roughCrazyk187 is a jewel in the roughCrazyk187 is a jewel in the roughCrazyk187 is a jewel in the rough
Default Re: ice cream paint job on my host...

I talked to him be said they cook it at 130 degrees fahrenheit for 90 min...........so I just told him to skip that and leave it over night ..............
__________________
445nm <1500mw Waterproof BOB Custom
405nm <5mW ebay pen
3-mode 405nm <156mw Aruora soon to be 500mw+
640nm <253mw Colmanmax
Crazyk187 is offline   Reply With Quote
Old 10-11-2011, 01:39 PM #10
foulmist's Avatar
Class 3R Laser
 
Join Date: Mar 2011
Location: Smolyan, Bulgaria
Posts: 1,076
Rep Power: 107
foulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond repute
Send a message via Skype™ to foulmist
foulmist foulmist is offline
Class 3R Laser
foulmist's Avatar
 
Join Date: Mar 2011
Location: Smolyan, Bulgaria
Posts: 1,076
Rep Power: 107
foulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond repute
Send a message via Skype™ to foulmist
Default Re: ice cream paint job on my host...

great, post a photo of the finished product
foulmist is offline   Reply With Quote
Old 10-11-2011, 02:10 PM #11
jeffreythe00's Avatar
Class 3B Laser
 
Join Date: Jan 2010
Location: USA, Plains, Pennsylvania
Posts: 2,531
Rep Power: 15414
jeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond repute
Send a message via Skype™ to jeffreythe00
jeffreythe00 jeffreythe00 is online now
Class 3B Laser
jeffreythe00's Avatar
 
Join Date: Jan 2010
Location: USA, Plains, Pennsylvania
Posts: 2,531
Rep Power: 15414
jeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond reputejeffreythe00 has a reputation beyond repute
Send a message via Skype™ to jeffreythe00
Default Re: ice cream paint job on my host...

130F is about normal temperature for my argon. I would say that it is a good idea to not have it cooked. I hope you plan to share the photos!
__________________
Want to be a part of the member map? Pm me!

Personal lasers
532nm 130mW Spartan
532nm 160mW Wicked lasers EVO
532nm 130mW Wicked Lasers Executive Pro: Nexus

520nm 1.4W Ehgemus custom
660nm >78mW Newwish
635nm 500mW 501B
445nm >1W 1st Gen Kryton Groove
445nm >2.7W DeadEYmo Custom
473nm 25mW re-tuned B&W Tek Labby
Wicked Lasers Torch
Radiant x4 LPM
jeffreythe00 is online now   Reply With Quote
Old 10-11-2011, 05:05 PM #12
Ramsey_innovations's Avatar
Class 2 Laser
 
Join Date: May 2009
Location: Central FL.
Posts: 352
Rep Power: 22
Ramsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud of
Ramsey_innovations Ramsey_innovations is offline
Class 2 Laser
Ramsey_innovations's Avatar
 
Join Date: May 2009
Location: Central FL.
Posts: 352
Rep Power: 22
Ramsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud of
Default Re: ice cream paint job on my host...

Just out of curiosity, what is the host made of? Just a tip, if it's aluminum and he's using an automotive paint, make sure he's using an etching primer or acid etch and alodine process to ensure adhesion. Good luck and can't wait to see the finished product.
__________________
Build Log
80mw-130mw 405nm (12+ builds) PHR803T harvested from sleds
>200mw 405nm (3x) SF-AW210
>500mw 405nm (2x) 10XBDR-S06
>100mw 532nm (4x) O-like modules
>80mw 532nm (3x) "fleabay" modules
>200mw 532nm (1x) Trilights "150mw" TEC cooled, TTL Lab module
<5mw 632nm (1x) Lasiris Inc. Lab module
150mw->300mw 650nm (10+ builds) LOC harvested diodes
100mw 660nm (10x) 9mm can, unknown Manufacturer
>100mw 780nm (10+x) PHR sled IR diodes and various DVD burners
>3.5watts ?904nm? (1x) C-mount, unknown manufacturer
150mw->500mw RGUV "White Laser" (3x) Custom Carbon Fiber Builds
Ramsey_innovations is offline   Reply With Quote
Old 10-11-2011, 05:39 PM #13
Crazyk187's Avatar
Class 2 Laser
 
Join Date: Jan 2011
Location: Fort Wayne, IN
Posts: 284
Rep Power: 12
Crazyk187 is a jewel in the roughCrazyk187 is a jewel in the roughCrazyk187 is a jewel in the roughCrazyk187 is a jewel in the rough
Crazyk187 Crazyk187 is offline
Class 2 Laser
Crazyk187's Avatar
 
Join Date: Jan 2011
Location: Fort Wayne, IN
Posts: 284
Rep Power: 12
Crazyk187 is a jewel in the roughCrazyk187 is a jewel in the roughCrazyk187 is a jewel in the roughCrazyk187 is a jewel in the rough
Default Re: ice cream paint job on my host...

Quote:
Originally Posted by foulmist View Post
great, post a photo of the finished product
O yea I will!!!!!!!!!!!

Just out of curiosity, what is the host made of? Just a tip, if it's aluminum and he's using an automotive paint, make sure he's using an etching primer or acid etch and alodine process to ensure adhesion. Good luck and can't wait to see the finished product.

He knows what he's doing !!! I did not ask if he was gonna but im sure he knows.......
__________________
445nm <1500mw Waterproof BOB Custom
405nm <5mW ebay pen
3-mode 405nm <156mw Aruora soon to be 500mw+
640nm <253mw Colmanmax
Crazyk187 is offline   Reply With Quote
Old 10-11-2011, 06:16 PM #14
Crazyk187's Avatar
Class 2 Laser
 
Join Date: Jan 2011
Location: Fort Wayne, IN
Posts: 284
Rep Power: 12
Crazyk187 is a jewel in the roughCrazyk187 is a jewel in the roughCrazyk187 is a jewel in the roughCrazyk187 is a jewel in the rough
Crazyk187 Crazyk187 is offline
Class 2 Laser
Crazyk187's Avatar
 
Join Date: Jan 2011
Location: Fort Wayne, IN
Posts: 284
Rep Power: 12
Crazyk187 is a jewel in the roughCrazyk187 is a jewel in the roughCrazyk187 is a jewel in the roughCrazyk187 is a jewel in the rough
Default Re: ice cream paint job on my host...

Obviously he hasn't started to paint it yet but here is a preview of the color.... he works at a huge automotive chain hey actually painted this car he has paint left over that' how I got lucky







__________________
445nm <1500mw Waterproof BOB Custom
405nm <5mW ebay pen
3-mode 405nm <156mw Aruora soon to be 500mw+
640nm <253mw Colmanmax
Crazyk187 is offline   Reply With Quote
Old 10-11-2011, 06:19 PM #15
Ramsey_innovations's Avatar
Class 2 Laser
 
Join Date: May 2009
Location: Central FL.
Posts: 352
Rep Power: 22
Ramsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud of
Ramsey_innovations Ramsey_innovations is offline
Class 2 Laser
Ramsey_innovations's Avatar
 
Join Date: May 2009
Location: Central FL.
Posts: 352
Rep Power: 22
Ramsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud ofRamsey_innovations has much to be proud of
Default Re: ice cream paint job on my host...

Quote:
Originally Posted by Crazyk187 View Post
He knows what he's doing !!! I did not ask if he was gonna but im sure he knows.......
Yeah I figured, it's just not too often in the auto body industry that you have to paint aluminum due to the fact that most vehicles do not have aluminum body panels. I painted cars professionally for about three years before I ever even heard of etch and alodine, until I had to paint the roof on Acura NSX (aluminum). After about 8 years of auto body experience I got into painting private jets and helicopters. Of course aircraft are mostly aluminum so etching was a daily job.
__________________
Build Log
80mw-130mw 405nm (12+ builds) PHR803T harvested from sleds
>200mw 405nm (3x) SF-AW210
>500mw 405nm (2x) 10XBDR-S06
>100mw 532nm (4x) O-like modules
>80mw 532nm (3x) "fleabay" modules
>200mw 532nm (1x) Trilights "150mw" TEC cooled, TTL Lab module
<5mw 632nm (1x) Lasiris Inc. Lab module
150mw->300mw 650nm (10+ builds) LOC harvested diodes
100mw 660nm (10x) 9mm can, unknown Manufacturer
>100mw 780nm (10+x) PHR sled IR diodes and various DVD burners
>3.5watts ?904nm? (1x) C-mount, unknown manufacturer
150mw->500mw RGUV "White Laser" (3x) Custom Carbon Fiber Builds
Ramsey_innovations is offline   Reply With Quote
Old 10-11-2011, 06:50 PM #16
CDHDC's Avatar
Class 1M Laser
 
Join Date: Dec 2009
Location: OR USA
Posts: 248
Rep Power: 24
CDHDC has a brilliant futureCDHDC has a brilliant futureCDHDC has a brilliant futureCDHDC has a brilliant futureCDHDC has a brilliant futureCDHDC has a brilliant futureCDHDC has a brilliant futureCDHDC has a brilliant futureCDHDC has a brilliant futureCDHDC has a brilliant futureCDHDC has a brilliant future
CDHDC CDHDC is offline
Class 1M Laser
CDHDC's Avatar
 
Join Date: Dec 2009
Location: OR USA
Posts: 248
Rep Power: 24
CDHDC has a brilliant futureCDHDC has a brilliant futureCDHDC has a brilliant futureCDHDC has a brilliant futureCDHDC has a brilliant futureCDHDC has a brilliant futureCDHDC has a brilliant futureCDHDC has a brilliant futureCDHDC has a brilliant futureCDHDC has a brilliant futureCDHDC has a brilliant future
Default Re: ice cream paint job on my host...

Our booth is set at 140F. And remember, that's air temperature. The part itself will not get that hot. If it were mine, I'd just pull it out after 30 minutes, and let it sit for 24 hours.
__________________
- CDHDC -

_____________________________________________
405nm 5mW pointer (X2)
405nm 6X in a DIY Jayrob chrome mini w/G1 and copper H/S measured @ 238mW
405nm Jet Lasers PL-C 800 measured @ 800mW
445nm Diode in a DIY 18650 S/S Flaminpyro host @ 1.1 amps measured @ 987mW
445nm W/L Spyder III Arctic measured @ 743mW
532nm Jet Lasers PL-C 500 measured @ 659mW
532nm Jet Lasers PL-D 500
532nm 5mW pointer
532nm W/L E2 (X2) measured @ 85 & 97mW
532nm Jet Lasers Ti-B 100mW
Misc. cheapie reds
CDHDC is offline   Reply With Quote
Reply





Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



























Privacy Policy | Advertising Disclaimer | Terms of Use


 


All times are GMT. The time now is 01:58 AM.


Powered by: vBulletin
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO
Privacy Policy | Advertising Disclaimer | Terms of Use
Copyright (C) 2017 Laser Pointer Forums, LLC