LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
pre-order phr803t sled 16$ each Shipped sold out
- Thread starter jake21
- Start date
- Joined
- Jul 24, 2008
- Messages
- 1,415
- Points
- 36
Re: pre-order phr803t Diode 16$ each Shipped
i may be in for 5 depending on a few things
i may be in for 5 depending on a few things
daguin
0
- Joined
- Mar 29, 2008
- Messages
- 15,989
- Points
- 113
Re: pre-order phr803t Diode 16$ each Shipped
Maybe I'm being obtuse. I'm going to get very "basic" here, because I don't think I'm expressing myself clearly enough.
You say you are getting just the diode and show a picture of just the diode, but show the box an entire sled comes in. Also, the important picture would be the back side of the diode, not the front. The back side of the diode will tell us if it is harvested or OEM? This will also show if they have the square "bar code" on them?
This is a sled. It has two diodes, the electronics, and the optics with it.
This is just a diode in a heat sink, showing that it has the bar code and that it was harvested (not OEM)
Are you receiving entire sleds or just the diodes?
Peace,
dave
Maybe I'm being obtuse. I'm going to get very "basic" here, because I don't think I'm expressing myself clearly enough.
You say you are getting just the diode and show a picture of just the diode, but show the box an entire sled comes in. Also, the important picture would be the back side of the diode, not the front. The back side of the diode will tell us if it is harvested or OEM? This will also show if they have the square "bar code" on them?
This is a sled. It has two diodes, the electronics, and the optics with it.
This is just a diode in a heat sink, showing that it has the bar code and that it was harvested (not OEM)
Are you receiving entire sleds or just the diodes?
Peace,
dave
- Joined
- Feb 23, 2008
- Messages
- 2,832
- Points
- 48
Re: pre-order phr803t Diode 16$ each Shipped
wow except for the first sentence and a half of the first post it almost looks like you copied sentences from my thread. i guess imitation is the highest form of flattery......
lol this isnt a pre-order. its a gb. if it was a real PRE-ORDER that would mean youve already paid for the sleds.
wow except for the first sentence and a half of the first post it almost looks like you copied sentences from my thread. i guess imitation is the highest form of flattery......
jake21 said:
lol this isnt a pre-order. its a gb. if it was a real PRE-ORDER that would mean youve already paid for the sleds.
some ppl need that appearantlydaguin said:
andy_con
0
- Joined
- May 24, 2007
- Messages
- 3,394
- Points
- 0
Re: pre-order phr803t Diode 16$ each Shipped
im interested in 5
im interested in 5
daguin
0
- Joined
- Mar 29, 2008
- Messages
- 15,989
- Points
- 113
Re: pre-order phr803t Diode 16$ each Shipped
I know I'm being pedestrian here, but I don't want you or anyone else getting ripped off here. Something just doesn't add up here for me.
So we've established a few things, but some others are left.
Things we know:
1) The diodes are, in fact, NOT OEM
2) You are not harvesting them
3) Some unnamed person, somewhere is willing to pop them out of the sled for free
4) You have less than effective communication with your supplier
**********************************************************
Things still unknown:
1) Are these, in fact, from the PHR-803T sleds
2) If harvested, is the PCB still attached?
3) Does your supplier understand the need to (and will he take the precautions needed to) protect from ESD?
4) How is the diode and heat sink going to be removed?
5) If ordering more than one, will the individual diodes be packaged individually?
5) Will it be re-packaged in such a way as to protect the diode from both impact AND ESD?
*********************************************************************************
Here's why it doesn't add up for me. Either you or he are being evasive and/or withholding information. When tied down more specifically, the answer is, "(somebody) misunderstood". The proffered explanation of the actual conditions of the diodes (shipped in a heat sink) doesn't match with your representative photo or description (just a diode). The supplier is willing to sit down to harvest the diodes, repackage them, and dispose of the waste for free.
We have already seen one example of how PSX Boy treats harvested diodes (removed from heat sinks, PCB removed with heat, scraped into a pile for the picture) I am NOT saying your supplier is PSX Boy. I am saying that we have seen repeatedly in this forum that if these diodes are not treated gently they will fail or end up with their windows broken.
Peace,
dave
jake21 said:
I know I'm being pedestrian here, but I don't want you or anyone else getting ripped off here. Something just doesn't add up here for me.
So we've established a few things, but some others are left.
Things we know:
1) The diodes are, in fact, NOT OEM
2) You are not harvesting them
3) Some unnamed person, somewhere is willing to pop them out of the sled for free
4) You have less than effective communication with your supplier
**********************************************************
Things still unknown:
1) Are these, in fact, from the PHR-803T sleds
2) If harvested, is the PCB still attached?
3) Does your supplier understand the need to (and will he take the precautions needed to) protect from ESD?
4) How is the diode and heat sink going to be removed?
5) If ordering more than one, will the individual diodes be packaged individually?
5) Will it be re-packaged in such a way as to protect the diode from both impact AND ESD?
*********************************************************************************
Here's why it doesn't add up for me. Either you or he are being evasive and/or withholding information. When tied down more specifically, the answer is, "(somebody) misunderstood". The proffered explanation of the actual conditions of the diodes (shipped in a heat sink) doesn't match with your representative photo or description (just a diode). The supplier is willing to sit down to harvest the diodes, repackage them, and dispose of the waste for free.
We have already seen one example of how PSX Boy treats harvested diodes (removed from heat sinks, PCB removed with heat, scraped into a pile for the picture) I am NOT saying your supplier is PSX Boy. I am saying that we have seen repeatedly in this forum that if these diodes are not treated gently they will fail or end up with their windows broken.
Peace,
dave
Re: pre-order phr803t Diode 16$ each Shipped
the supplier misunderstood me because he thought i wanted the diode in the heatsink, i wanted them in the complete sled so when i order it will come to me as a complete sled in a box
1) Are these, in fact, from the PHR-803T sleds
yes
2) If harvested, is the PCB still attached?
if i harvested them no if u like them on that's up to u
3) Does your supplier understand the need to (and will he take the precautions needed to) protect from ESD?
ill ask him
4) How is the diode and heat sink going to be removed?
i have antistatic equipment to remove diodes from there heatsink and static bags for the diode
5) If ordering more than one, will the individual diodes be packaged individually?
yes
the supplier misunderstood me because he thought i wanted the diode in the heatsink, i wanted them in the complete sled so when i order it will come to me as a complete sled in a box
1) Are these, in fact, from the PHR-803T sleds
yes
2) If harvested, is the PCB still attached?
if i harvested them no if u like them on that's up to u
3) Does your supplier understand the need to (and will he take the precautions needed to) protect from ESD?
ill ask him
4) How is the diode and heat sink going to be removed?
i have antistatic equipment to remove diodes from there heatsink and static bags for the diode
5) If ordering more than one, will the individual diodes be packaged individually?
yes
daguin
0
- Joined
- Mar 29, 2008
- Messages
- 15,989
- Points
- 113
Re: pre-order phr803t Diode 16$ each Shipped
I feel like I'm on a merry-go-round here
So you are ordering and receiving complete sleds in their individual boxes, from your supplier. YOU are harvesting the diodes from the sled. YOU are harvesting them (including removing the PCB) for free (or you are making a higher profit on complete sleds). YOU are repackaging them and reshipping them for $16 each. You will press the diode into a module for $5 more ($4 for the module and $1 to press it). The total cost for a PHR-803T diode, without PCB, pressed into an AiziX module, is $21, total cost, shipped.
Peace,
dave
jake21 said:
I feel like I'm on a merry-go-round here
So you are ordering and receiving complete sleds in their individual boxes, from your supplier. YOU are harvesting the diodes from the sled. YOU are harvesting them (including removing the PCB) for free (or you are making a higher profit on complete sleds). YOU are repackaging them and reshipping them for $16 each. You will press the diode into a module for $5 more ($4 for the module and $1 to press it). The total cost for a PHR-803T diode, without PCB, pressed into an AiziX module, is $21, total cost, shipped.
Peace,
dave
