Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Kryton Groove - 110mW PHR Blu-ray

daguin

daguin

0
Joined
Mar 29, 2008
Messages
15,989
Points
113
Here's one I agonized over for awhile. After I was done searching up some Krytons for two customers, I was offered this one. I got it with the full intention of tearing it apart and making at least a 6X out of it. However, after I got it, it was built "too well" for me to just rip it apart. It is not my build, but I would be proud to say that it was. It is built very well.

I've hung onto it for awhile, but realized That I do not need another PHR based laser. I thought that I would give y'all the chance at it before I go ahead and tear it apart to upgrade it.

It has a PHR diode that is driven by a V3 flexdrive. It has an aiXiz acrylic lens. It is putting out 110mW with the acrylic lens. It puts out 145mW with a 405-G-1 low loss lens.

I'll take $130 for it (shipped in the US)
kryton1-1.jpg

kryton2.jpg


Peace,
dave
 





daguin

daguin

0
Joined
Mar 29, 2008
Messages
15,989
Points
113
Except for the >500mW violet (which was built in a heavy duty host on purpose). My "personal" lasers are all Kryton Grooves (violet, red, green).

Peace,
dave
 
bryce007

bryce007

0
Joined
Jul 1, 2009
Messages
1,679
Points
0
daguin said:
Except for the >500mW violet (which was built in a heavy duty host on purpose). My "personal" lasers are all Kryton Grooves (violet, red, green).

Peace,
dave
Click to expand...

awesome. Ken's got my kryton smooth right now for anodizing. I want to put the S03 in there if it works out.
 
daguin

daguin

0
Joined
Mar 29, 2008
Messages
15,989
Points
113
bryce007 said:
awesome. Ken's got my kryton smooth right now for anodizing. I want to put the S03 in there if it works out.
Click to expand...

The "S03" (I hate that we are still calling it that) WILL work out to be "something." We just don't know what yet ;)

Peace,
dave
 
bryce007

bryce007

0
Joined
Jul 1, 2009
Messages
1,679
Points
0
daguin said:
The "S03" (I hate that we are still calling it that) WILL work out to be "something." We just don't know what yet ;)

Peace,
dave
Click to expand...

Yea I didn't know what to call it. I should have said, "supposed S03".
 
daguin

daguin

0
Joined
Mar 29, 2008
Messages
15,989
Points
113
bryce007 said:
Yea I didn't know what to call it. I should have said, "supposed S03".
Click to expand...

Nah -- Too awkward. If someone actually finds and buys a real S03, then we'll have to do something. For now, I will just hate it.

Peace,
dave
 
Flaminpyro

Flaminpyro

0
Joined
May 4, 2009
Messages
5,443
Points
113
I will join you in the disliking of the newly named BDR-F03 for what they cost me i could have bought one of the new 12X BLU-RAY's.....
 
bryce007

bryce007

0
Joined
Jul 1, 2009
Messages
1,679
Points
0
Flaminpyro said:
I will join you in the disliking of the newly named BDR-F03 for what they cost me i could have bought one of the new 12X BLU-RAY's.....
Click to expand...

Ouch! I made a quick decision on that GB, and now regret it. From now on, I'm going to try my best to wait until the sleds are confirmed and tested. But it makes it hard when the suppliers always say that there is a very limited number available. But they just probably say that to get you to order quickly.

BTW, pyro, I just noticed how close our sigs are. The last line of them I mean :)
 
Last edited:
Flaminpyro

Flaminpyro

0
Joined
May 4, 2009
Messages
5,443
Points
113
you and me both only I was doubly endowed with stupidness of the quick buy and hooked myself twice not even on the same line now I realy feel small LOL

I was hoping you wouldnt take offence but then they are different beasts Cu-Alum-Cu-Alum you know what I mean I hope !
Oops sorry thread jack...

bryce007 said:
Ouch! I made a quick decision on that GB, and now regret it. From now on, I'm going to try my best to wait until the sleds are confirmed and tested. But it makes it hard when the suppliers always say that there is a very limited number available. But they just probably say that to get you to order quickly.

BTW, pyro, I just noticed how close our sigs are. The last line of them I mean :)
Click to expand...
 
bryce007

bryce007

0
Joined
Jul 1, 2009
Messages
1,679
Points
0
Flaminpyro said:
you and me both only I was doubly endowed with stupidness of the quick buy and hooked myself twice not even on the same line now I realy feel small LOL

I was hoping you wouldnt take offence but then they are different beasts Cu-Alum-Cu-Alum you know what I mean I hope !
Oops sorry thread jack...
Click to expand...

Yea it's hard to resist sometimes. Patience isn't my best quality, but I'm learning it now (stupid DX!)

No offense taken on the sigs. I just want that beast order to go through! (lack of patience showing again)

We can't win if yours says "perfect" and mine says "near perfect", lol. changed that :)

I guess we are threadjacking, but it's already sold isn't it? I think blake will be very happy with it.
 
Last edited:
starkm31

starkm31

0
Joined
Aug 6, 2009
Messages
260
Points
0
I "hate" it when something comes up, and sold lickity split. Blink. Blink.

BTW, how does one post "reps"?
 
daguin

daguin

0
Joined
Mar 29, 2008
Messages
15,989
Points
113
starkm31 said:
I "hate" it when something comes up, and sold lickity split. Blink. Blink.

BTW, how does one post "reps"?
Click to expand...

I'm not sure if there is a "threshold" for being able to give rep or not in this software. In the old one you had to have at least 50 posts to give rep. If you are able to give rep, there will be a little icon of a "scale" under the poster's avatar. If it is there, click on it and do your thing. If it is not there, you may have to reach the threshold before you can do so.

Peace,
dave
 
You must log in or register to reply here.




Top