Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

WTB: three drivers DONE

B

ben74

0
Joined
Jan 7, 2008
Messages
678
Points
0
Hey, want to buy three drivers one for red, green and blu-ray. I need the 100ohm pot to be changeable by hand and must  be  connected by a long wire to the board. the red driver needs to be  20mA to 300mA. blu-ray 20mA to 125mA and green, well i dont know but its a standstone11 40-50mW module that i would like to power from 50mW to 5mW.  
 





Re: WTB: three drivers

Have you chedked the b/s/t stickies?  DrLava Flex drives and rkcstr adjustable drives.
 
Re: WTB: three drivers

Yeah but your not abel to turn the pot with your hand as you need a screw driver and like i said it needs to be on a wire far from the board.
 
Re: WTB: three drivers

Theres no limits on size or input voltage. I need something already made as i am trying and failing at making my own 317 driver.
 
Re: WTB: three drivers

I can sell you a driver with a pot that can be turned by hand, it would be one driver for all the ranges but you would need to monitor the current. All you would need to power it is a 9vdc wall adapter.
 
Re: WTB: three drivers

Sounds good but i need three drivers and for the pot to be on a wire so that its far away from the board so that i can change the current with out unscrewing anything.  
 
Re: WTB: three drivers

Come on guys, i need three 317 drivers with the pot that can be changed by hand and for it to be far away from the board.
 
I was going to make one unit with variable resistance ranges (like a knob to select 50-100, 100-150, 150-300 etc etc) with a remote pot... I think thats the easiest way.
 
You must log in or register to reply here.


Back
Top