WTB: 9mm 808nm laser diodes

[Midknight]

Dose anyone have a good source for 9mm 808nm laser diodes?

 

[lazerguy]

Yea, try www.stonetek.org/shop

SenKat sells them there, for a very good price. They are about 200mw.

EDIT: My bad. :-[ I didn't see you were looking for 9 mm ones, his are 5.6mm.

 

[RA_pierce]

http://www.roithner-laser.com/LP-laserdiodesIR.htm
Maybe?

They don't list prices...
SLD323V, the second from the bottom in the 808nm section is 1W in a 9mm can.

SLD322V, is 500mW. They are both Sony multimode diodes.

RLT808-150GS is 150mW and single mode.

 

[Midknight]

http://www.roithner-laser.com/LP-laserdiodesIR.htm
Maybe?

They don't list prices...
SLD323V, the second from the bottom in the 808nm section is 1W in a 9mm can.

SLD322V, is 500mW. They are both Sony multimode diodes.

RLT808-150GS is 150mW and single mode.

Would these be good for pumping green or blue? They give or take 10nm @ 808nm.

 

[Switch]

[quote author=RA_pierce link=1221091586/0#2 date=1221151304]http://www.roithner-laser.com/LP-laserdiodesIR.htm
Maybe?

They don't list prices...
SLD323V, the second from the bottom in the 808nm section is 1W in a 9mm can.

SLD322V, is 500mW. They are both Sony multimode diodes.

RLT808-150GS is 150mW and single mode.

Would these be good for pumping green or blue? They give or take 10nm @ 808nm.[/quote]

They would probably give temperature sensitive DPSS lasers. ;D

 

[brtaman]

Try and find some diodes with better tolerances. 808 +-10 is 798nm and 818nm at the extremes which is pretty much useless for DPSS from what I have read.

http://cgi.ebay.com/500mw-808nm-las...39:1|66:2|65:12|240:1318&_trksid=p3286.c0.m14

Here ya go, dont know about the seller or the quality of his products, but these 9mm diodes with a +-3nm tolerance would be much better suited for your application, as you are probably not going to be putting a temp stabilizing TEC system into your laser.


Thanks
brtaman