Will this laser work with my driver

[nosebleedXD]

kk so the driver i built was
http://www.rog8811.com/LM317 components01.jpg?0.35312663627278806

i want to buy this
650nm 20x DVD Burner Laser Diode in Aixiz Laser Module Housing [LPC-815 in Aixiz module] - $22.38 : High Tech DealZ, Simplifying the LASER Hobby!

if anyone remembers from months ago i was attempting to build a laser, unfortunately, i broke 4 diodes in the process and failed uberly

i tried my best to solder wires into the small pins, they would either snap off and yeah...

so i was just wondering if this driver i built will work with that laser

i will ask the owner if its possible for him to solder some wires for me

i no longer trust myself with installing a laser diode myself

 

[Gryphon]

Yes it will work. Just make sure you set the current on the driver with a test load and discharge the cap beofre hooking up you diode. If your finding it hard to solder to the diodes leads try using an iron with a smaller tip an always keep it clean. I have two irons myself, one which i bought for the sole purpose of soldering leads to diodes and assembling drivers.

 

[nosebleedXD]

=[ i wonder if the guy will solder wires for me or not for now ima wait

 

[Momo66342]

kk so the driver i built was
http://www.rog8811.com/LM317 components01.jpg?0.35312663627278806

i want to buy this
650nm 20x DVD Burner Laser Diode in Aixiz Laser Module Housing [LPC-815 in Aixiz module] - $22.38 : High Tech DealZ, Simplifying the LASER Hobby!

if anyone remembers from months ago i was attempting to build a laser, unfortunately, i broke 4 diodes in the process and failed uberly

i tried my best to solder wires into the small pins, they would either snap off and yeah...
Remember, to much heat blows your diode

so i was just wondering if this driver i built will work with that laser
Yes it will, now all you got to do is learn how to set the mA

i will ask the owner if its possible for him to solder some wires for me

Go to modwerx.com to get the diode in module with wires​

i no longer trust myself with installing a laser diode myself

Everything else looks great.
Just to note,if this one comes out bad, don't get frustrated.I did when my blu-ray went wrong,and boy that was a mess.

 

[nosebleedXD]

haha hey i found out this cool blue ray laser deal and i was wondering if you could help me check it out

http://laserpointerforums.com/f38/first-time-building-laser-please-help-42281.html#post554239