Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Which one ??

S

shemp

0
Joined
Jun 25, 2008
Messages
3
Points
0
Hi all , Let me start by saying this is the best form for info on lasers ,I have a few reds , buying my first green , I would like some feed back some of the lasers i am looking at.

Opotronics PPL 125 or the 165
Nova Alpha 125

Thanks
 





well,for starts i agree with ya on the forums
now for your question im not sure about the Nova Alpha as i do not know but optotronics is a good laser got on eof theirs myslef (its overpowered) and its really good id go with optotronics

-xxkillxx
p.s. you shuld start with a <5mW i would if starting with greenies because as some might know green is more sensitive to the eye then red so wear protective goggles for anything over 10mW thnks
 
Razako he said PPL not RPL, but you should go with the RPL from optotronics its better than the PPL.

Diachi
 
Well for starter's better quality of the laser and if you look at the website there adjustable and come on who doesn't like that? ;D Plus when you get a RPL right now you get a 4.99 Premium I might just get me one of these too
Specs. of PPl:

Adjustable power levels via 10 position switch in tail cap (zero = off).
Size: Body diameter 30 mm Head diameter 40 mm x 235 mm
Weight: Approximately 300 grams (without battery)
Wavelength: 532nm
Laser diode: Powerful 1.2 Watt n-Light IR diode (encased in copper to improve heat transfer).
Laser diode lifetime: 80,000 hours MTTF with n-Light's BriteLife Technology
Type: DPSS laser
Transverse mode: TEM00
532nm CW output power: 100mW, 125mW,165mW and 225mW
Beam divergence (full angle): <1.2mrad
Beam diameter: <1.5 mm
Operating temperature range: 15 C ~ 30 C
Switch: push button or constant on/off
Power supply: two C-size batteries (3VDC)
Warranty: 6 months
But with the RPL Series i noticed warrenty is much better good beam divergance and last but not least an adjustable cap for better power!!!! ;D

-xxkillxx
 
Ok , you are saying I should get the optotronics RPL 165 with the adjustable cap?
 
Sorry for the threadjack, but if you're interested in buying an RPL send me a PM - I MAY be able to get you a better deal. (My really awesome deals are on the 300mW and up, on a 165mW it'll be tight as to whether Jack/opto or I am a better choice. Send me a PM anyway though ;))
 
You must log in or register to reply here.


Back
Top