Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers
Buy Site Supporter Role (remove some ads) | LPF Donations
Links below open in new window
FrozenGate by Avery
Ttl
- Thread starter 0calli
- Start date
GBD
0
- Joined
- Oct 25, 2010
- Messages
- 783
- Points
- 0
Depends on your application, what are you trying to do?
Generally, TTL will have two modes upon an input, 0V and 5V, 5V bieng laser off, and 0V bieng laser on.
if you are just looking at turning on your laser to run it.. Leave the TTL alone and don't worry about it.
Last thing: *cough* search bar *cough*
Generally, TTL will have two modes upon an input, 0V and 5V, 5V bieng laser off, and 0V bieng laser on.
if you are just looking at turning on your laser to run it.. Leave the TTL alone and don't worry about it.
Last thing: *cough* search bar *cough*
Last edited:
- Joined
- Dec 17, 2010
- Messages
- 1,144
- Points
- 48
You only need TTL (or analog) modulation if you are doing a project that requires rapid on-off cycles (or color blending), such as a laser scanner, projector, etc. 
Last edited:
- Joined
- Sep 20, 2008
- Messages
- 17,635
- Points
- 113
The other trick is to read the User Instructions
or contact the seller...
From your other Thread... I understood that your
Laser was emitting a beam...
Jerry
or contact the seller...
From your other Thread... I understood that your
Laser was emitting a beam...
Jerry
Last edited:
- Joined
- Sep 20, 2008
- Messages
- 17,635
- Points
- 113
Come on now... did you contact the seller...:thinking:
Does your laser emit a beam...:thinking:
EDIT
Did you know that double posting one post after the
other within a short period of time is considered bad
Forum etiquette....:undecided:
You can easily Edit and Add information to your last
post.. Like I just did here...:beer:
Jerry
Does your laser emit a beam...:thinking:
EDIT
Did you know that double posting one post after the
other within a short period of time is considered bad
Forum etiquette....:undecided:
You can easily Edit and Add information to your last
post.. Like I just did here...:beer:
Jerry
Last edited:
well sorry about the etiqutte but if you havent noticed im new here still learning i dont understand it though im posting a concern in a a thread i started i dont think im hurting any feelings its like writing in caps is considered yelling i find that so childdish its letters that create a word very simple to me anyways thnx for the heads up.
hakzaw1
0
- Joined
- Apr 2, 2009
- Messages
- 10,661
- Points
- 113
^^^ Jerry is right- just edit and add your new thoughts
iirc you must add power ( I think most of them take 5 vdc) to make a laser with both ttl and analog modulation turn on. But with TTL only you need not use he extra set of wires to fire it up.
They have TTL to do quick off and on w/o harm to the laser as just turning the power off and on is not a good thing,
analog allows you to not only do off and on but also any mW you want from the lasers thus giving you hundreds of colors TTL will only give you 7 colors in a RGB projector.
hope this helps
now you owe me $2
just send that to LPF a a donation
iirc you must add power ( I think most of them take 5 vdc) to make a laser with both ttl and analog modulation turn on. But with TTL only you need not use he extra set of wires to fire it up.
They have TTL to do quick off and on w/o harm to the laser as just turning the power off and on is not a good thing,
analog allows you to not only do off and on but also any mW you want from the lasers thus giving you hundreds of colors TTL will only give you 7 colors in a RGB projector.
hope this helps
now you owe me $2
just send that to LPF a a donation