Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Trying to get diode/module to power on

P

pr0jkt

0
Joined
Apr 12, 2012
Messages
82
Points
0
Hi,

I have a extracted module that I am trying to put in a different host. By reading and trying to make sense of all of this, am I soldering correctly (or do I even need too??) I'm so lost and so mad, and was hoping to have this working for tomorrow nights fireworks :(

* the pictured module is a random one (i don't know if its still alive or dead) i was trying the solder to see if i could get any power.
IMG_20120703_111804.jpg



Here is the actual module I am trying to get working ( aluminum heatsink and brass tube are removed)
 





To do a quick test on a green module get a 2x AA holder and touch the positive wire to the brass and the negative to the spring.

And those pics are two different modules...
 
Last edited:
benmwv said:
To do a quick test on a green module get a 2x AA holder and touch the positive wire to the brass and the negative to the spring.

And those pics are two different modules...
Click to expand...


I've got one of theses

red is positive and black is neg right>
IMG_20120703_133936.jpg
 
Well it's not gonna work if you have an empty spot in your battery holder. Put a wire or something across that spot.
 
I got 3 batteries in there...took the red wire and hooked it to the spring...then the black i touched all up and down the gold and nothing lit up...is there anything i could be doing wrong? or anything i could do to help
 
Re read my post again. Red goes to the brass, black to the spring. You really shouldn't use 3 batteries though.
 
OMG it worked!!!!!! now i just got to figure out how to get it snug and secure inside the host
 
and the module that i was testing is working but only shining a red light
 
yeah that red light is the infrared, dont look at it, it will screw your eyes up. what i think has happened is you have somehow damaged your laser or it is a cheap chinese made one. best to buy a new one
 
daawood123 said:
yeah that red light is the infrared, dont look at it, it will screw your eyes up. what i think has happened is you have somehow damaged your laser or it is a cheap chinese made one. best to buy a new one
Click to expand...

it wasnt cheap but it is a chinese one... the module is working just fine...but the host it was in cracked...and now i am trying to figure how i can get it working again or what i can use. :( I wanna light fireworks
 
OMG ...its a good job this isnt a HV site .....just wen u thought it couldnt get worse ....and then ............
 
You must log in or register to reply here.





Back
Top