Sinner Copper magic pen/ PLP450nm

[Lifetime17]

Hi folks,
Just completed another Sinner Cu Magic Pen This completes three pens in three WL's PLP450/Mitsu 700/Pl520. Hope you all enjoy the build...
In it is;
Sinner Cu Magic Pen
Lazeerer- boost drive set to 300mA
Diode -DTR PLP450nm
G2 & 3 element Lens
2-Efest 10440 Cells

So here are some pics hope you like them.. Rich

 

[Jersagfast]

Nice pen. I bet 300mw to that host is nothing and can run unlimited duty cycle :yh:
Nice build +1
Thanks,

 

[Lifetime17]

Hi,
Thank you J, yes it can run for a while the entire host is a sink. But i don't push any of my builds, i treat them well .

Rich

 

[Isaac Clarke]

ugh i wish those copper host have side switch.....
and a 405nm add to the trio would be a once in a life time collection.

hope you get the pun

 

[Lifetime17]

Hi F,
As a matter of fact i have another CU pen and i do have a BDR-209/405nm Blu Ray sled i have to tear down. That was my intensions , you read my mind but first i have to build a 2-18650 cell full CU host with a NUG/520 first. Thank you for looking your reply is all ways welcome..

Rich

 

[Isaac Clarke]

alright then you going to have a competitor..... caus i'm planing to build a NDG7475/520nm as well!!!!

 

[Lifetime17]

HI F,
Nice like see it soon these diodes are really super bright. And the WL is astonishing put in a really nice host sweet.
I have 2-NDG700 builds and another NDG7475 build and 2-PLP520's all are really great performers. I will be receiving a 510nm diode soon running it low around 40 to 50 mW to keep the WL at 510nm or less basically it will be a Cyan beam..

Rich

 

[GSS]

Nice, now we are all set to go on that secret mission:shhh:

 

[Lifetime17]

Nice, now we are all set to go on that secret mission:shhh:

Hi G,
Well one more to go it will be a 405nm 16X BDR-209 BLU Ray diode, have to pull it out of a sled i have first. . So that will complete The 4 affordable WL's .
I was surprised how well the 450nm divergence is almost like a 405nm, burns like hell when focused.
I'll be building a 1W 520nm tonight in an all CU 2-cell 18650 host .

Thanks buddy;;Rich

 

[Isaac Clarke]

wow you have a money tree in your back yard or something?

how many Benjamin did you send to DTR for last Christmas?

 

[GSS]

wow you have a money tree in your back yard or something?

how many Benjamin did you send to DTR for last Christmas?

I would think hard work and being honest played a big part yes Rich maby we should wait for that 405nm in case we get captured and tied and have to burn through the rope quick. If the divergence on that 450 is anything like the sweet 2.5W 450 you built for me it has to be awesome at that little lower power:beer:

 

[Lifetime17]

I would think hard work and being honest played a big part yes Rich maby we should wait for that 405nm in case we get captured and tied and have to burn through the rope quick. If the divergence on that 450 is anything like the sweet 2.5W 450 you built for me it has to be awesome at that little lower power:beer:

Hi G,
Thank you for the compliment much appreciated. Hard work is correct many years under me. Would;t want it any other way. Glad you are enjoying my build it's an honor to give the best i can always. The 405nm takes time to tear down a sled the right way and you get a Bonus of a flat package red that puts out about almost 200mW pushing it on a PSU. Thank you my friend for checking out my stuff and everyone else that replies..

Rich