Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



Safety Windows

blink

New member
Joined
Dec 21, 2017
Messages
2
Points
0
Hello there, this is my first post.
I build 3d printers and i am adding a laser to the printer head, instead of the filament extruder. So far, with goggles, everything is OK.
I am using a blue 2.5W eleksmaker laser from Banggood.

But i am looking to make an enclosure, with quality safety windows.
I am very concerned about safety and quality...

Any advice on where and what to buy regarding safety windows?

Thank you
 



diachi

Well-known member
Joined
Feb 22, 2008
Messages
9,793
Points
113
Hello there, this is my first post.
I build 3d printers and i am adding a laser to the printer head, instead of the filament extruder. So far, with goggles, everything is OK.
I am using a blue 2.5W eleksmaker laser from Banggood.

But i am looking to make an enclosure, with quality safety windows.
I am very concerned about safety and quality...

Any advice on where and what to buy regarding safety windows?

Thank you

Laser Safety Windows
 

diachi

Well-known member
Joined
Feb 22, 2008
Messages
9,793
Points
113
Right to the Point.. er

Thanks!
No problem!

Might want to make an enclosure out of steel/aluminum/wood/acrylic with small windows, those laser safety windows are expensive! :beer:
 
Last edited:




Top