Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

red laser i want help me






kontomanikos said:
the diode is good
and diode driver
Click to expand...

I've done many builds with the 826, it's a really great diode. Just be careful soldering! I used that driver or my absolute first build ever, if I remember correctly my 815 handled it at maximum no problem, so the 826 will handle it just fine :)

Best of luck!!
 
Fretwrecker94 said:
I've done many builds with the 826, it's a really great diode. Just be careful soldering! I used that driver or my absolute first build ever, if I remember correctly my 815 handled it at maximum no problem, so the 826 will handle it just fine :)

Best of luck!!
Click to expand...
thanks
 
this driver diode
2 pack Red laser/808nm laser diode driver 80-500mA w/TTL [OLDD20] - $5.99 : Zen Cart!, The Art of E-commerce
wants some arrangement
 
Kyosama66 said:
Wouldn't this driver run that diode better?

2 pack Red laser/808nm laser diode driver 80-500mA w/TTL [OLDD20] - $5.99 : Zen Cart!, The Art of E-commerce

That driver is recommended at 400-500 mA, but the original driver only goes to 350. This one can put out up to that 500mA mark.

Of course, now I'm looking at picking up this set, too... :D
Click to expand...

so if i bought this driver with the ttl input, i could adjust the current going to the diode externally? what else is required? the knob, potentiometer? TIA
 
cheech226 said:
so if i bought this driver with the ttl input, i could adjust the current going to the diode externally? what else is required? the knob, potentiometer? TIA
Click to expand...

I really have no idea. I was just speaking in terms of available current settings for these drivers.
 
You must log in or register to reply here.





Back
Top