- Joined
- May 10, 2011
- Messages
- 1,878
- Points
- 48
You didn't burn the coating on the lpm did u
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
Radient electronics lpm :)
- Thread starter blakegriffin
- Start date
- Joined
- Dec 23, 2007
- Messages
- 2,494
- Points
- 0
I second that, are you focusing the laser to a point on the TEC?
- Joined
- Aug 10, 2011
- Messages
- 250
- Points
- 0
No I am not focusing Otto a point. Wouldn't that like burn the cencor
- Joined
- Sep 20, 2008
- Messages
- 17,622
- Points
- 113
Are the batteries that power the LPM freshly charged..???
The Alpha does not use a voltage regulator and the electronics
will follow the Battery voltage as it drops.
Yeah... if you go over the rated Power Density of the coating
you will burn it.. Proper use of the sensor is probably in the
User Instructions..
EDIT
Sorry... I see fresh batteries helped..
Jerry
The Alpha does not use a voltage regulator and the electronics
will follow the Battery voltage as it drops.
Yeah... if you go over the rated Power Density of the coating
you will burn it.. Proper use of the sensor is probably in the
User Instructions..
EDIT
Sorry... I see fresh batteries helped..
Jerry
Last edited:
