Hiemal
0
- Joined
- Dec 27, 2011
- Messages
- 1,443
- Points
- 63
Hey guys.
So, long story short, I'm moving across the country and can't bring like 99% of my electronics stuff with me.
So you guys get to buy my stuff, what joy!!
(none of the pics will be shown on here, you gotta follower linkies.)
----------------------------------------------------------------------------------------
Mini Wireless Power Demonstrator
http://i.imgur.com/z6hWTM2.jpg
I built this quite a while ago. It's in essence a ZVS driver, built with some slight modifications to allow for super low current draw. It runs off of one 9 volt battery. The UV LED gets pretty bright when you get close to the transmitter and is a pretty fun toy to play around with, and can mystify your friends saying "WIRELESS VOODOO". Doesn't get even the slightest bit hot, either. Comes with a personal warranty of mine; If it breaks within 3 months of you getting it, I'll refund your money and you can send it back and I'll figure out where I went wrong. Don't abuse this though. I will come for you if you do.
Asking $25 for this lil dude. Also $5.5 shipping.
----------------------------------------------------------------------------------------
Second misc. pack.
Imgur
2 red 650 nm diodes, one pulled from a BD-burner sled, and one from a SHOWXX pico projector.
They're both 3.8 mm diodes, one is already pre-mounted in a copper module. Can include a AR-coated acrylic with it.
The one pre mounted is the SMOC one from the BD-drive, it should be able to handle roughly 400-450 mA. Asking $15 for it since it's premounted. If you want the AR-coated lens with it add another $2 with it.
The one from the showxx should be able to handle about 200-250 mA. I'm asking just $7 for it.
I also have a PHR-805T diode I removed from a pen. It can take 110 mA and is perfect for lil diode builds. Asking $10 for it. I can also push it in a module for another $5 including a basic acrylic lens.
And then one of those corning G-1000 green modules, it puts out 530 nm light. It's a lil tricky to get it working right but it's very powerful for the size it is. Asking $20 for it.
If shipping costs are not explicitly stated, I'll give the cost estimate when you let me know what you want to buy. Everything small should be $2. If you combine stuff together I'll knock a dollar or two off.
I can potentially take trades, depending on what you're offering.
Thanks for looking/perusing! :wave:
So, long story short, I'm moving across the country and can't bring like 99% of my electronics stuff with me.
So you guys get to buy my stuff, what joy!!
(none of the pics will be shown on here, you gotta follower linkies.)
----------------------------------------------------------------------------------------
Mini Wireless Power Demonstrator
http://i.imgur.com/z6hWTM2.jpg
I built this quite a while ago. It's in essence a ZVS driver, built with some slight modifications to allow for super low current draw. It runs off of one 9 volt battery. The UV LED gets pretty bright when you get close to the transmitter and is a pretty fun toy to play around with, and can mystify your friends saying "WIRELESS VOODOO". Doesn't get even the slightest bit hot, either. Comes with a personal warranty of mine; If it breaks within 3 months of you getting it, I'll refund your money and you can send it back and I'll figure out where I went wrong. Don't abuse this though. I will come for you if you do.
Asking $25 for this lil dude. Also $5.5 shipping.
----------------------------------------------------------------------------------------
Second misc. pack.
Imgur
2 red 650 nm diodes, one pulled from a BD-burner sled, and one from a SHOWXX pico projector.
They're both 3.8 mm diodes, one is already pre-mounted in a copper module. Can include a AR-coated acrylic with it.
The one pre mounted is the SMOC one from the BD-drive, it should be able to handle roughly 400-450 mA. Asking $15 for it since it's premounted. If you want the AR-coated lens with it add another $2 with it.
The one from the showxx should be able to handle about 200-250 mA. I'm asking just $7 for it.
I also have a PHR-805T diode I removed from a pen. It can take 110 mA and is perfect for lil diode builds. Asking $10 for it. I can also push it in a module for another $5 including a basic acrylic lens.
And then one of those corning G-1000 green modules, it puts out 530 nm light. It's a lil tricky to get it working right but it's very powerful for the size it is. Asking $20 for it.
If shipping costs are not explicitly stated, I'll give the cost estimate when you let me know what you want to buy. Everything small should be $2. If you combine stuff together I'll knock a dollar or two off.
I can potentially take trades, depending on what you're offering.
Thanks for looking/perusing! :wave:
Last edited:
