LewDude
0
- Joined
- Jul 16, 2017
- Messages
- 364
- Points
- 63
I am a few days late posting this - life has been very full (typical w/5 children and a FT jobbie)...but I'm super happy to share this build with the community. As well as sing some more praises for some good peeps around these parts...no pun intended. :beer:
Build:
<488nm Sharp Diode (procured and measured via ZRaffleTicket and Paul1598419)
Pico Drive (by Astralist)
14500 Blue Coated Host (by Lifetime17)
The driver is set a 145mA - diode is putting out ~64 mW and according to some math by ZRaffleTicket, should be JUST under 488nm in wavelength. The diode was spectro'd at 487.6 nm @ 100 mA.
Host (w/o focus adapter):
IMAG2079 by Lewie Wilkinson, on Flickr
Business of the host: I have to say, typically screwing together the pieces of a host can make you cringe...these threads are BUTTER smooth. I actually ENJOY screwing this thing together. Lovely job @Lifetime17!!!
IMAG2082 by Lewie Wilkinson, on Flickr
Tail-cap clicky: Another great aspect of this host, nice feel to this switch.
IMAG2081 by Lewie Wilkinson, on Flickr
Host was pre-wired to drop-in the module (nice silicone wires, plenty of length to work with):
IMAG2080 by Lewie Wilkinson, on Flickr
Tailcap end of host:
IMAG2083 by Lewie Wilkinson, on Flickr
Matching focus adapter w/lens installed (3eG) (was using acrylic, but the three-element was longer and fit better):
IMAG2092 by Lewie Wilkinson, on Flickr
The Driver on a test load (very easy to set this diode to desired current, great size, too - kudos to @Astralist!):
IMAG2078 by Lewie Wilkinson, on Flickr
Module wired up, ready for its new home:
IMAG2090 by Lewie Wilkinson, on Flickr
MMMmmmmm:
IMAG2106 by Lewie Wilkinson, on Flickr
A picture with the flash on - so you can see the host, too
IMAG2109 by Lewie Wilkinson, on Flickr
Beam shot:
IMAG2096 by Lewie Wilkinson, on Flickr
"Same" diode - 490ish on L, 488 on R:
IMAG2121 by Lewie Wilkinson, on Flickr
A couple more beam shots, just for fun :beer:
IMAG2101 by Lewie Wilkinson, on Flickr
IMAG2146 by Lewie Wilkinson, on Flickr
Build:
<488nm Sharp Diode (procured and measured via ZRaffleTicket and Paul1598419)
Pico Drive (by Astralist)
14500 Blue Coated Host (by Lifetime17)
The driver is set a 145mA - diode is putting out ~64 mW and according to some math by ZRaffleTicket, should be JUST under 488nm in wavelength. The diode was spectro'd at 487.6 nm @ 100 mA.
Host (w/o focus adapter):

Business of the host: I have to say, typically screwing together the pieces of a host can make you cringe...these threads are BUTTER smooth. I actually ENJOY screwing this thing together. Lovely job @Lifetime17!!!

Tail-cap clicky: Another great aspect of this host, nice feel to this switch.

Host was pre-wired to drop-in the module (nice silicone wires, plenty of length to work with):

Tailcap end of host:

Matching focus adapter w/lens installed (3eG) (was using acrylic, but the three-element was longer and fit better):

The Driver on a test load (very easy to set this diode to desired current, great size, too - kudos to @Astralist!):

Module wired up, ready for its new home:

MMMmmmmm:

A picture with the flash on - so you can see the host, too


Beam shot:

"Same" diode - 490ish on L, 488 on R:

A couple more beam shots, just for fun :beer:

