Need 808/850nm Laser driver + Other

[Alien Laser]

I'm building another 1W+ and need a driver the working voltage must be low similar to 600+nm laser's
if anyone can find a working driver around 1000mA/1200mA please post link if possible
Wavelength: 850nm
Output power: cw 1000mw
Working voltage: 1.9-2.2V
Working current: 1200mA

 

[Deleted member 57455]

I'm building another 1W+ and need a driver the working voltage must be low similar to 600+nm laser's
if anyone can find a working driver around 1000mA/1200mA please post link if possible
Wavelength: 850nm
Output power: cw 1000mw
Working voltage: 1.9-2.2V
Working current: 1200mA

I've tested my buck driver to work extremely well with the low vF Ir diodes. You can build up the open source one or by it from me pre built and tested. https://sites.google.com/view/giannislasershack/open-source-drivers

 

[Z80 Lasers]

I've got a few buck drivers that will work.

 

[paul1598419]

Good to see you back. All buck drivers should work with this diode as long as they are able to supply your needed current. DTR is still around. Haven't heard from Jordan in awhile, but he has an employee now that fills in for him.