Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

My phr build is complete!!!

  • Thread starter Thread starter carulli
  • Start date Start date
C

carulli

Guest
After killing the last phr diode (cap discharge) and being pre addicted to bluray after making a ps3 bluray pointer I was so happy when I got this baby up and running ;D. its using a n mxdl (2x 3.6v cr2123a) and a rckstr driver set at 130ma. I built it using a heatsink made my me.
 

Attachments

  • 19112008192.jpg
    19112008192.jpg
    45.3 KB · Views: 151





carulli said:
After killing the last phr diode (cap discharge) and being pre addicted to bluray after making a ps3 bluray pointer I was so happy when I got this baby up and running ;D. its using a n mxdl (2x 3.6v cr2123a) and a rckstr driver set at 130ma. I built it using a heatsink made my me.
Click to expand...
Heh, that blows mine out of the water. I need heatsyncs :(
 
beam shot with small amount of settled deodorant
 

Attachments

  • 19112008185.jpg
    19112008185.jpg
    37 KB · Views: 73
excuse the mess lol ;D
 

Attachments

  • 19112008186.jpg
    19112008186.jpg
    34.2 KB · Views: 80
simplysped2 said:
[quote author=carulli link=1227041388/0#0 date=1227041388]After killing the last phr diode (cap discharge) and being pre addicted to bluray after making a ps3 bluray pointer I was so happy when I got this baby up and running ;D. its using a n mxdl (2x 3.6v cr2123a) and a rckstr driver set at 130ma. I built it using a heatsink made my me.
Click to expand...
Heh, that blows mine out of the water. I need heatsyncs :([/quote]

Nah mate yours looks great, maybe heatsinks would be a good option, you could machine your own use washers or buy one of jayrobs (their better than mine).
 
That is one nice laser! To avoid diode death due to cap discharge, I always put a resistor (maybe 470 ohm) across the cap. This resistor guarantees that the cap will be discharged quickly.
 
billg519 said:
That is one nice laser! To avoid diode death due to cap discharge, I always put a resistor (maybe 470 ohm) across the cap. This resistor guarantees that the cap will be discharged quickly.
Click to expand...

thanks mate haw many watts is the resistor rated for?
 
The second beamshot is cool, I like how you can really see the focusing point. Nice build. ;D
 
Dude, you have posted only a smilie in just about all of your posts!

STOP SPAMMING THE FORUM! >:(


And nice laser, Colier! :) Those beamshots are pretty neat, I also use deo spray as I don't have a fog machine yet. Can't go wrong with that host, either: Looks great and has plenty room for heatsinking.
 
You must log in or register to reply here.





Back
Top