Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

My first laser build

MG42

0
Joined
Jan 19, 2011
Messages
2
Points
0
Success!

I recently purchased a kit for my first laser from modwerx and it werx

I used the sf-aw210 6x blu-ray diode 405nm.

I tested it with a couple of homemade circuits then I installed it into this module. I also added the 405-450nm AR coated lens they sell.

Then I wired it up to the rckstr ~55 to 440mA driver and set it around 160mA.

My first laser:

169017_1448843196015_1681274839_886788_282914_n.jpg


165319_1448836835856_1681274839_886782_8092533_n.jpg


166376_1450685482071_1681274839_889531_6210639_n.jpg


Any suggestions for a good host? Nothing too tight since I'm still a noob. This module is around 18x45mm.

Thanks guys.

I just finished my first host:

180561_1450686922107_1681274839_889533_6625321_n.jpg


168011_1450687642125_1681274839_889534_2959902_n.jpg


It's a bit large but it works.

I took two laser pointer/led flashlights from radioshack and made a frankenhost out of em and a few other bits I had laying around.

It runs on 6 AAA's right now.

I'm happy!
 
Last edited:




Top