- Joined
- Oct 23, 2009
- Messages
- 25
- Points
- 0
what is used in this laser:
PHR 803T diode
Aixiz module
LM317T
10 ohm resistor
47 microfarad capacitor
4 AA batteries
Momentary switch
So here's my question, what kind of flash light host could i use for this? I'm going to switch to a different type of batteries, maybe rechargeable, maybe regulars... The reason i'm asking this question is because, as you can see, i made my own driver, and it's output is nonadjustable, since it is outside of the Aixiz module, it will take up more space. And the driver has a max current output of 125mA to protect the LD from doing something crazy. So could i connect a 9 volt battery to this set up (in the video) and it will work just fine??? what's my limits with battery choice... a rough estimate would be appreciated!
Thanks,
Sean
PHR 803T diode
Aixiz module
LM317T
10 ohm resistor
47 microfarad capacitor
4 AA batteries
Momentary switch
So here's my question, what kind of flash light host could i use for this? I'm going to switch to a different type of batteries, maybe rechargeable, maybe regulars... The reason i'm asking this question is because, as you can see, i made my own driver, and it's output is nonadjustable, since it is outside of the Aixiz module, it will take up more space. And the driver has a max current output of 125mA to protect the LD from doing something crazy. So could i connect a 9 volt battery to this set up (in the video) and it will work just fine??? what's my limits with battery choice... a rough estimate would be appreciated!
Thanks,
Sean
Last edited: