Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

My First Hosted Blu-Ray!

P

pianoman2011

0
Joined
Feb 11, 2009
Messages
505
Points
0
I have been experimenting with 405nm lasers for about two months now, but had not yet installed anything in a host. Now that has changed! Tired of waiting for my money accumulate so I can buy one of Jayrob's beautiful hosts, I decided to hold myself over with a decent looking Altoids tin and a 9v battery. It only looks alright, but what the hey, it's still worth posting. Tell me what you think!

Beam:
Beam.jpg


Inside:
Inside.jpg


Side:
Side.jpg


Top (nice brushed steel effect, soon to cover the whole tin):
Top.jpg


Sorry for the extreme size of the photos. Oh, and if anybody is wondering, the screws are there to hold the 9V battery in place. Plus they make the host look better :).

-Jakob
 





An LM317 Constant Current Driver (DDL driver). With electrical tape wrapped around it to prevent any shorts.

-Jakob
 
So whats the power output? I'm assuming your using a PHR at around 120mA or so. If that's the case, how are you heatsinking it? Perhaps the Altoids tin is absorbing some of the heat?

Oh, BTW, you should try GIMP for your pictures. Its your best friend if you don't want to pay hundreds for Adobe photoshop. It has a heap load of features to do pretty much anything you want, but most notable is the scaling feature for your pictures. :) I love the GIMP, I use it all the time for cropping, scaling and touching up pictures. It's very easy to use.

http://gimp-win.sourceforge.net/
 
leukoplast said:
So whats the power output?  I'm assuming your using a PHR at around 120mA or so.   If that's the case, how are you heatsinking it?  Perhaps the Altoids tin is absorbing some of the heat?

Oh, BTW, you should try GIMP for your pictures.  Its your best friend if you don't want to pay hundreds for Adobe photoshop.    It has a heap load of features to do pretty much anything you want, but most notable is the scaling feature for your pictures.  :)  I love the GIMP, I use it all the time for cropping, scaling and touching up pictures.  It's very easy to use.

http://gimp-win.sourceforge.net/
Click to expand...

Thanx for the link, just downloaded and installed the program, looks really nice and less complicated than PS
 
pianoman2011 said:
Top (nice brushed steel effect, soon to cover the whole tin):-Jakob
Click to expand...

Congrats, the first finished build. I'm sure your having fun now that your really portable. Just don't forget how dangerous these things are.

Have you ever seen a biplane with a aluminum cowl. Where they used a powered rotary hand tool to polish in overlapping swirls. You could do it with a Dremel tool. Or do a smooth polish or some other pattern.

swirl.jpg


--John
 
leukoplast said:
So whats the power output?  I'm assuming your using a PHR at around 120mA or so.   If that's the case, how are you heatsinking it?  Perhaps the Altoids tin is absorbing some of the heat?

Oh, BTW, you should try GIMP for your pictures.  Its your best friend if you don't want to pay hundreds for Adobe photoshop.    It has a heap load of features to do pretty much anything you want, but most notable is the scaling feature for your pictures.  :)  I love the GIMP, I use it all the time for cropping, scaling and touching up pictures.  It's very easy to use.

http://gimp-win.sourceforge.net/
Click to expand...

Haha it will be a short-lived PHR... the only heatsinking is the Aixiz and maybe the altoids tin absorbs a bit... but there's barely any contact between the Aixiz and tin. And it's running at around 145mA on a fully charged 9v. So I'm not expecting more than two weeks out of it.

And thanks for the link to GIMP. And I actually do have Photoshop CS2 (I'm not gonna say how I got it ::))... I just don't really kn ow how to use it. I also have Paint.NET (an equivalent program to GIMP, pretty much a free version of PS). I recommend that program, but I forget where I got it... google is your friend.


Congrats,  the first finished build.  I'm sure your having fun now that your really portable.  Just don't forget how dangerous these things are.

Have you ever seen a biplane with a aluminum cowl.  Where they used a powered rotary hand tool to polish in overlapping swirls.  You could do it with a Dremel tool.  Or do a smooth polish or some other pattern.  


--John
Click to expand...

Thanks! I am having fun and don't worry, I won't forget safety. I have seen this sort of metal brush effect before but I unfortunately have no dremmel or rotary sander or anything of the sort :(. I also like blu-ray junkie's idea; I might try that! :)



Some of that pearl spay paint would look cool.
Click to expand...

Nice idea! Does it stick to metal?




-Jakob
 
You must log in or register to reply here.





Back
Top