Laserbtb batteries

[BillyBob]

Hey I am planning to buy this laser PL 405/445nm 500-2000mW 1600mw. What battery should I use 18650 or 2 16340?

 

[SteveT]

Hey I am planning to buy this laser PL 405/445nm 500-2000mW 1600mw. What battery should I use 18650 or 2 16340?

2 x 16340 will see you right.

 

[gozert]

If you scrolled down a little bit and looked at the datasheet you would've noticed it. Like SteveT said, it takes 2x 16340's

 

[BillyBob]

What is a good quality 16340 battery? Would prefer from amazon. Was thinking about these http://www.amazon.com/AW-16340-Rech...=UTF8&qid=1432505814&sr=1-1&keywords=AW+16340. Or these http://www.amazon.com/Efest-16340-7...&keywords=IMR+16340+3.7V+Rechargeable+Battery

 

[Encap]

What is a good quality 16340 battery? Would prefer from amazon. Was thinking about these http://www.amazon.com/AW-16340-Rech...=UTF8&qid=1432505814&sr=1-1&keywords=AW+16340. Or these http://www.amazon.com/Efest-16340-7...&keywords=IMR+16340+3.7V+Rechargeable+Battery

The battery information is on the product web page.

What should be self evident from your choices, the AW are best choice because they are button top----think about it--the Efest you chose are flat top---you need the button top if using 2 batteries so the top of one can contact the bottom of the other or a small magnet maybe 1/4" diameter X 2 or 3mm thick to connect the two

Efest are good batteries --if you want Efest get the button top version http://www.amazon.com/Efest-700mAh-Rechargeable-Button-Batteries/dp/B00NMXP6CY/ref=pd_sim_sbs_23_1/176-2482393-4235540?ie=UTF8&refRID=076K69KJCAFEFSW0E98W

 

[BillyBob]

Alright thanks anywhere I can get a good but cheap charger? Prefer from amazon.