Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Laser repair

C

Chackal

0
Joined
Oct 17, 2007
Messages
13
Points
0
I have a hand held laser from Laserglow and want to open it to repair the button.Do anyone know how to open this.Its a Pixy model 75mw green laser
 





I can't recall exactly, but I seem to remember the Pyxis being the PGL-III-A lasers with the interlock on the side of the battery cap (sold as Nova Alphas now). If so, with enough force you can unscrew the can at the top, and from there you can set out to remove everything. Its a bit difficult to get it all out and back into place without messing something up though, so you may want to proceed with caution. What's wrong with the button if you don't mind me asking?
 
Warranty is over.And the problem with the button is that is not making good contact,sometimes theres no contact and laser will not glow
 
Hmm, well don't just tear into it right away. Also, try contacting LaserGlow and see what the repair cost would be. I just wouldn't want to chance something like that.
 
Laserglow will not repair its laser,it will send a new one for 200 dollrs,thats the cost for a new laser.
 
have you tried emailing? but i guess they don't make the lasers themselves so it is probably reasonable. and if you don't feel comfortable doing it yourself i'm sure that there is someone that is a bit more confident that will fix it for you for dirt cheap.
 
merged consecutive posts

the front cap is so tight that it looks like one whole piece.And yes it has the interlock in the battery cap,and also a key for safety.

Lserglow is vary lazy in answering emails,but thats what the do.The company is in Canada.
 
Last edited by a moderator:
Also, as a larger companies they have priorities that don't include small time hobbyists. Or they could just be bogged down. But I say follow what Pseudo said, I don't really know anything about that style of laser casing.
 
if these are the same as nova alphas, perhaps nova would be willing to repair it for a reasonable fee? i'm pretty sure they do some repairs.
 
That's my biggest gripe about the RPL. Crap switch.

Forget the plunger switch and rotary dial on the end! Give it a UI like HDS/Novatac! Now THAT would be a truly programmable laser! 8-)


Hmmmm SOS mode with 350mW...now that could be useful. Triple click = 10 mW. Press and hold = 400. etc. I don't think the locator flash will be necessary. ;D

Best of all it would be a cinch to make waterproof!
 
I have some new inf.from the box the laser came in,it says its a PGL-lll-A model,comes fron Changchun China,it has a 500mw pump diode,cristal typeNd:VY04/KTP.You said something interesting there Nordhavn but Im not a technician on this,make it more simple.Thanks to all of you on the forum.Im checking this foron frequently to see if theres some light I can use.
 
Chackal said:
I have some new inf.from the box the laser came in,it says its a PGL-lll-A model,comes fron Changchun China,it has a 500mw pump diode,cristal typeNd:VY04/KTP.You said something interesting there Nordhavn but Im not a technician on this,make it more simple.Thanks to all of you on the forum.Im checking this foron frequently to see if theres some light I can use.
Click to expand...

Yes, it is a PGL-III-A which is just a larger version of the GLP-I (aka CNI black/gold, aka viper, aka x series, etc). The pump and crystal are standard for these lasers, doesn't really do anything to help your problem though. If you really want to get into it, you will need to unscrew the front where you see the line in the body. It takes a bit of force perhaps, but its the first in a series of increasingly difficult steps if you plan on remedying it yourself :-/
 
merged consecutive posts

OK,pseudo,you seem to know something I dont know,can you tell me the difficulties Im about toe encounter,or any warnig before I get to surgery on this Laser.I would like to know in advance so to try to go around it.Thats why I am here.It seems to be out of focus too.Like a collimator off place.

What are the steps on removing te top,what should I see and to do.

I also have a laser display system and I would like to get some more juice out of it,it has 30mw,I opened it and saw 2 pot,one blue and lays flat on the board and the other one is yellow and lays vertical to the board,any ifo will be greatly appreciated.
 
Last edited by a moderator:
Pictures, and a LITTLE bit more description would be well advised if you are expecting any kind of assistance here ! What TYPE of laser ? Brand ? power ? Make ? etc ? You gotta give some details - not just, " my lazorz busted - fix it, thnks"

Short descriptions do not help at all.
 
SenKat said:
Pictures, and a LITTLE bit more description would be well advised if you are expecting any kind of assistance here !  What TYPE of laser ? Brand ?  power ? Make ? etc ?  You gotta give some details - not just, " my lazorz busted - fix it, thnks"

Short descriptions do not help at all.
Click to expand...

(Pssst. There's a page 1 Greg ;))
 
You must log in or register to reply here.


Back
Top