Just found this forum and looking at buying a decent laser here is what im looking at
Technical Specifications:
· Wavelength: 532nm.
· Beam mode: ADJUSTABLE AND TEM00.
· Temperature stabilizing: BLACK ANODISED ALUMINIUM AIR COOLED HEAT SINK.
· CRYSTAL HARMONICS USED: Nd: YVO4+KTP AR/AR COATED ONE PIECE RECTANGLE CROSS SECTION.
· Line breadth: <0.1 nm
· Beam diameter: 1.0+/-0.2 mm
· Beam diameter at the aperture (1/e2) (mm) :< 2
· Beam divergence: 1.02+/-0.4 m rad
· OUTSIDE Work temperature: -30 to +44 DEG C AT SEA LEVEL.
· Preheat time :< 2 SECONDS
· Expected lifetime: ≥20000 hours.
· Polarization Ratio: 100:1
· Beam Quality: m2<1.2Beam.
· Pump diode: 1000 milli watt 808nm +-3%, single emitter c/wave.
. Power 130 MW
. Class 3B
What could this laser do will the beem be visible?
Think it might pop balloons ?
I'm kinda new to lasers and don't know what all this means but hey that's what the forums are for right to learn!!
Cheers and good to be here
Bucks88
Technical Specifications:
· Wavelength: 532nm.
· Beam mode: ADJUSTABLE AND TEM00.
· Temperature stabilizing: BLACK ANODISED ALUMINIUM AIR COOLED HEAT SINK.
· CRYSTAL HARMONICS USED: Nd: YVO4+KTP AR/AR COATED ONE PIECE RECTANGLE CROSS SECTION.
· Line breadth: <0.1 nm
· Beam diameter: 1.0+/-0.2 mm
· Beam diameter at the aperture (1/e2) (mm) :< 2
· Beam divergence: 1.02+/-0.4 m rad
· OUTSIDE Work temperature: -30 to +44 DEG C AT SEA LEVEL.
· Preheat time :< 2 SECONDS
· Expected lifetime: ≥20000 hours.
· Polarization Ratio: 100:1
· Beam Quality: m2<1.2Beam.
· Pump diode: 1000 milli watt 808nm +-3%, single emitter c/wave.
. Power 130 MW
. Class 3B
What could this laser do will the beem be visible?
Think it might pop balloons ?
I'm kinda new to lasers and don't know what all this means but hey that's what the forums are for right to learn!!
Cheers and good to be here
Bucks88
Last edited: