Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

iso of ideas on repairing or modifying my old laser

Joined
Jun 20, 2015
Messages
25
Points
0
302mw_zps6almii5c.jpg




the button is on the end of the laser .. but thats not the problem .

the problem is .. the threads on the end of it to screw the cap on for the batterys in only like 2 threads .. and it no longer holds the cap on i have to hold it on .. which is really really annoying.

anyone had any luck in fixing these?

i got it from laserpointerpro like 2-3 years ago .. so returning it is pretty much out of the question
 





Aside from epoxy really not much.. laser pointer pro has some pretty terrible leasers. You are kind of lucky it lasted this long.
 
Aside from epoxy really not much.. laser pointer pro has some pretty terrible leasers. You are kind of lucky it lasted this long.

well epoxy is kinda out of the question considering thats my battery housing and my on and off switch ..

maybe strip it down and stick it in a new host?
 
You could give thread seal tape a try. It might be just enough for it to hold and is a cheap solution if it ends up working.
 
thought about buying the 3$ ebay laser .. but my on and off switch is totally different from that one .. so i dunno if it will work for it
 
You could give thread seal tape a try. It might be just enough for it to hold and is a cheap solution if it ends up working.

that may work temporarily i guess .. ill go see if i have any laying around
 


Back
Top