http://www.megalaseruk.com/laser03.htm
your thoughts?
also, could somebody direct me to a good place to buy a 5mw ?
your thoughts?
also, could somebody direct me to a good place to buy a 5mw ?
Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers
Buy Site Supporter Role (remove some ads) | LPF Donations
Links below open in new window
FrozenGate by Avery
Is this a good 405nm to buy?
- Thread starter JamTKD
- Start date
- Joined
- Jan 20, 2008
- Messages
- 1,724
- Points
- 0
Awfully expensive for a 20mW... You should be able to find a ~100mW one in our Buy/Sell/Trade board for under $100US, or you can build one yourself for about $60.
rancor
0
- Joined
- Dec 22, 2008
- Messages
- 31
- Points
- 0
They all look like overpriced lasers we can build.
i suck at building
building is not my thing.
is there a cheaper place to buy a fully assembled blu-ray laser? please direct me if so.... i want quality too, because i most likely wont be buying another for awhile.
and i'm not really able to buy very dangerous ones like the 100mw
building is not my thing.
is there a cheaper place to buy a fully assembled blu-ray laser? please direct me if so.... i want quality too, because i most likely wont be buying another for awhile.
and i'm not really able to buy very dangerous ones like the 100mw
- Joined
- Sep 20, 2008
- Messages
- 17,635
- Points
- 113
You need to do a bit of research and reading on the forum...
The Information you seek is there....
A member has already pointed you in the right direction with a link...
You should follow his advice...
BTW... welcome to the Forum....
Jerry
- Joined
- Jan 20, 2008
- Messages
- 1,724
- Points
- 0
No worries, the forum can be a bit much to take in at first... Orient yourself, have a look around.. Looking over the B/S/T board I found this which might interest you: http://laserpointerforums.com/laser_pointer_forums_3/forum/showthread.php?t=40631
High quality bluray lasers for $80, fully adjustable. They're shipped out at 125mW, though if you like you can adjust the output lower (and as a side effect it will live much longer). Maybe you could ask yobresal if he can adjust it down to 20mW for you.
High quality bluray lasers for $80, fully adjustable. They're shipped out at 125mW, though if you like you can adjust the output lower (and as a side effect it will live much longer). Maybe you could ask yobresal if he can adjust it down to 20mW for you.
D
Deleted member 8382
Guest
- Joined
- May 12, 2009
- Messages
- 1,403
- Points
- 0
did u read his post... it sais he no longer sells complete builds hallucynagenyc. just thought i'd point that out, as the new member isnt a DIYer
- Joined
- Mar 31, 2009
- Messages
- 327
- Points
- 0
He could def PM me though and I may be able to point him in the right direction.
Ash
0
- Joined
- Mar 3, 2009
- Messages
- 1,981
- Points
- 0
Why not just go with one of the Chinese suppliers?
http://www.o-like.com/b2b_cpinfo.asp?id=947
80mW for $115 (focusable?)
and from looking at the host (dilda-like) you could probably get to the module and turn the pot to whatever resistance you want. (~5mA->+100mA)
Just a thought.
http://www.o-like.com/b2b_cpinfo.asp?id=947
80mW for $115 (focusable?)
and from looking at the host (dilda-like) you could probably get to the module and turn the pot to whatever resistance you want. (~5mA->+100mA)
Just a thought.
I'd recommend the http://hightechdealz.com/index.php?main_page=product_info&cPath=1&products_id=10 . You get 80+mW for $70 and you only need to add a battery. This is a very high quality laser, and I know for a fact you can adjust the power and focus.
Note: If you don't feel comfortable building a laser, you probably should stay away from pot tweaking as well. One wrong turn and you could fry your $70 laser.
Note: If you don't feel comfortable building a laser, you probably should stay away from pot tweaking as well. One wrong turn and you could fry your $70 laser.
- Joined
- Jun 3, 2009
- Messages
- 291
- Points
- 18
pphhtt there is no way it can go 15 miles
