Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

How do I dissasemble my 5mW 532nm Open-back Kaleidoscopic Green Laser Pointer Pen






Try not to post everywhere... (in case it should get too spread out on the Forum)

I wouldn't assume most people would know how to disassemble a laser like that... try getting the kaleidoscope top off first? Unscrewing or something? You'd need to take pics for us to get any idea... unless someone else on here happens to have that particular laser. GL
 
hwang21 said:
Try not to post everywhere... (in case it should get too spread out on the Forum)

I wouldn't assume most people would know how to disassemble a laser like that... try getting the kaleidoscope top off first? Unscrewing or something? You'd need to take pics for us to get any idea... unless someone else on here happens to have that particular laser. GL
Click to expand...
I got the kaleidescope off, and well here is a link to the particular laser i am talking about.
http://t3.gstatic.com/images?q=tbn:ANd9GcS-bIihLb1U7BD6NQoaR_1O6g2wuVWGEUjJNaTHDiFw0o6k5xZqzw
 
Wait,
images
AHA
 
Alright, take out the batteries and depress the power button to rid any residue charge. Then check to see if the unit is shorting against the host (flashlight might help), and then rattle it around and see if you can see anything, both looking down the barrel and up from the aperture. Pics would help

EDIT: Like actual pics, clean photos of your particular laser
 
Last edited:
hwang21 said:
Alright, take out the batteries and depress the power button to rid any residue charge. Then check to see if the unit is shorting against the host (flashlight might help), and then rattle it around and see if you can see anything, both looking down the barrel and up from the aperture. Pics would help

EDIT: Like actual pics, clean photos of your particular laser
Click to expand...
Nope can't see anything.
 
hwang21 said:
Alright, take out the batteries and depress the power button to rid any residue charge. Then check to see if the unit is shorting against the host (flashlight might help), and then rattle it around and see if you can see anything, both looking down the barrel and up from the aperture. Pics would help

EDIT: Like actual pics, clean photos of your particular laser
Click to expand...
Well can't see anything rattling around that is.
 
Haha it's ok. Is the button harder to depress than before? If the laser can still shine green then I'm not too sure it's the crystals. How long does it stay green? If it can remain on for a little bit you can see if the beam/dot is weird or something

EDIT: sorry missed a post. Ignore the first question :p
 
Last edited:
hwang21 said:
Haha it's ok. Is the button harder to depress than before? If the laser can still shine green then I'm not too sure it's the crystals. How long does it stay green? If it can remain on for a little bit you can see if the beam/dot is weird or something

EDIT: sorry missed a post. Ignore the first question :p
Click to expand...
Well it sometimes works if I hold it at the right angle but when it does it looks as if it was distorted or something, like when you shine a laser off something and it looks like it was sprayed.
 
Try to shoot a pic of the dot? If you decide to take it apart and something goes wrong, it's probably goodbye to the laser. Although, given the price of the laser, you could just grab another one if you don't want to bother :p
 
hwang21 said:
Try to shoot a pic of the dot? If you decide to take it apart and something goes wrong, it's probably goodbye to the laser. Although, given the price of the laser, you could just grab another one if you don't want to bother :p
Click to expand...
Well what I could do is just take the cap off this other laser I have.
 
You must log in or register to reply here.





Back
Top