Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Hiya reposing this cause the site was rolled back: 488nm custom host by me!

Giannis_TDM

Well-known member
Joined
Apr 27, 2019
Messages
895
Points
93
You know how it is sometimes shit happens. Sorry if you have already read this but yea, Anyways so ill give ya the short version I found a broken ecig couple months ago modded it heavily to turn into a host (cleaned it sanded chopped ect) and my 12mm cyan module fits snugly inside the top half the diameter of the host is about 13mm and 120mm in length picks can be seen below. Side note since the previous post I have also finished working on the bottom half too! I am just waiting for $$ to buy drivers rn.
Top half:
IMG_20191027_181811-min.jpgIMG_20191027_181822-min.jpg
bottom half before I worked on it:
JPEG_20191027_173604-min.jpgJPEG_20191027_204737-min.jpg <--- here it can be seen in the background
And finally Here it is the completed host!:
IMG_20191028_183256.jpgIMG_20191028_183334.jpgIMG_20191028_183235.jpg
Here you go!
 
Last edited:





Joined
Sep 20, 2013
Messages
17,438
Points
113
I noticed that many posts and threads were deleted overnight. I'm not sure what exactly caused this, but I saw that yours was not the only one.
 
Joined
Sep 20, 2013
Messages
17,438
Points
113
I saw that, but it doesn't explain why so many posts to other threads were also deleted. Many ongoing threads have posts deleted back to last Wednesday or even Tuesday. Makes no sense to me. By my count I lost 35 posts in total.
 

Giannis_TDM

Well-known member
Joined
Apr 27, 2019
Messages
895
Points
93
:) Where are going to put the power button?
Yea i was thinking about that ill put it prob in the back. You see the little plastic part at the bottom? it comes off and behind it there is the bat
I have barely enough space inside to do this but it looks awesome and I have put in so many hrs sanding cleaning ect. I really hope it works out(I have a small button from a 303 driver in hand to use)
 
  • Like
Reactions: GSS




Top