Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers
How to Register on LPF | LPF Donations
help!!!!!!!!!!!!!!!!!!!!
- Thread starter nfl
- Start date
brtaman
0
- Joined
- Jun 12, 2008
- Messages
- 1,199
- Points
- 48
Yeah, you are going to have to be more specific 
Otherwise as a quick fix depending on the laser you could fabricate a quick end cap using some wire and electrical tape, should keep the current flowing while you try and find a replacement. Just you are going to have to be more careful and be sure not to short anything out.
brtaman
Otherwise as a quick fix depending on the laser you could fabricate a quick end cap using some wire and electrical tape, should keep the current flowing while you try and find a replacement. Just you are going to have to be more careful and be sure not to short anything out.
brtaman
- Joined
- Apr 1, 2008
- Messages
- 3,924
- Points
- 0
If its a W.L. I have a FRONT CAP that will fit the back, if it's an executive series laser. It just has a lens hole in it that you can cork with foil. phoenix77/rob 