Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

ArcticMyst Security by Avery | Browser Hide by Avery

Help with Nichia Nubm31

ProGamer923

New member
Joined
Dec 25, 2023
Messages
3
Points
1
Hi, I'm somewhat new to electronics and I wanted to set up a Nichia Nubm31. The picture, however, does not seem to make sense to me. Is this picture saying that I have to connect the pins to themselves with the input and output pins being connected regularly? I have been looking online for months, but since this diode array is somewhat new, and was made in a different country, I can't seem to find a whole lot of information about it. Any help would be appreciated, thank you!s-l1600.jpgScreenshot (383).png
 





Yes, it connects exactly like in the picture. In this case, it is so if you use one driver for power supply. I use two, you will have to make it like in the picture. One driver will power both rows of diodes, and the other will power the other rows.
 

Attachments

  • Screenshot_20231225_214608_com.android.gallery3d_edit_977960507353896.jpg
    Screenshot_20231225_214608_com.android.gallery3d_edit_977960507353896.jpg
    796.3 KB · Views: 8
  • Screenshot_20231225_214626_com.android.gallery3d_edit_977954269437751.jpg
    Screenshot_20231225_214626_com.android.gallery3d_edit_977954269437751.jpg
    596.2 KB · Views: 9
Be very careful with the array pins. They are very fragile and can be easily screwed up. You use soft silicone cables because if they are hard they can twist the pins and break the threads in the array. That's why I use the board as a base, having previously disconnected all the contacts between the individual pins of the board.
You can use this 600W for power supply. You will need two drivers for every two rows. You need to set them up beforehand

600W Aluminum Plate DC-DC Boost Converter Adjustable 10A Step Up Constant Current Power Supply Module Led Driver
 
You can also run the diode strings individually like I did so you don't have to use a boost driver and just use a linear regulator.

3.jpg


Either way will work, just depends on what you want to do
 
Yes, it connects exactly like in the picture. In this case, it is so if you use one driver for power supply. I use two, you will have to make it like in the picture. One driver will power both rows of diodes, and the other will power the other rows.
I was thinking about using this driver:s-l1600.png

If I'm understanding you correctly you should wire the pins as shown in the picture if I plan to use a singular driver. Otherwise, I can hook them up differently if I use multiple drivers. Real quick, what is the benefit of using more than one driver?
 
Yes, if you use this driver you can connect all the pins exactly like the picture. I didn't recommend it to you because I recently received two, but they turned out to be a bad batch and couldn't power the array. There is information in my NUBM37 thread about this driver. I use the 600W ones because they work very stable. In this case, you need two of those 600W, because you cannot power the array with one. They put out about 60-64V, and you need a lot more.
 
Yes, if you use this driver you can connect all the pins exactly like the picture. I didn't recommend it to you because I recently received two, but they turned out to be a bad batch and couldn't power the array. There is information in my NUBM37 thread about this driver. I use the 600W ones because they work very stable. In this case, you need two of those 600W, because you cannot power the array with one. They put out about 60-64V, and you need a lot more.
Okay, sweet! Thank you kindly, this has been very helpful!
 





Back
Top